RE: [CAD_CAM_EDM_DRO] Re: G Code for 25 Pin D connector

Hi Dean,

Thanks for your quick reply.

Cheers,


Peter Homann
mailto:Peter.Homann@...
Adacel Technologies Limited,
250 Bay St, BRIGHTON, 3186, AUSTRALIA
http://www.adacel.com <http://www.adacel.com>
Telephone +61 (3) 8530 7777, Facsimile +61 (3) 9596 2960
Mobile 0421-601 665


-----Original Message-----
From: deanc500 [mailto:deancouillard@...]
Sent: Thursday, 28 November 2002 11:46 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: G Code for 25 Pin D connector

--- In CAD_CAM_EDM_DRO@y..., "Peter Homann" <peter.homann@a...> wrote:
> Hi,
>
> I'm looking to put my controller board in an enclosure. Does anyone
have G
> Code for cutting out a hole for a 25 Pin D connector that they could
share?


Hi, here is one I have for the slot. The two mounting holes can be
drilled after. It is done with a 1/8" end mill and .1" deep. If you
need different parameters let me know and I can tweek it.

Dean

[DB25 HOLE]
[RAPID HEIGHT 0.060"]
[FEEDRATE 5]
[USE 1/8" ENDMILL]
[CUTTING DEPTH 0.10"]
[ORIGIN IN CENTER OF HOLE]
[0.1" LEAD IN]
[0.01" FINISH PASS]
G70
F5
G90
G01Z0.060
M05
G00X0.574Y0.035
G01Z-0.100
M03
G01X0.575Y0.048
G01X0.578Y0.061
G01X0.582Y0.073
G01X0.588Y0.085
G01X0.595Y0.096
G01X0.604Y0.106
G01X0.614Y0.114
G01X0.624Y0.121
G01X0.636Y0.127
G01X0.649Y0.131
G01X0.661Y0.134
G01X0.674Y0.135
G01X0.684Y0.134
G01X0.692Y0.132
G01X0.701Y0.128
G01X0.708Y0.122
G01X0.715Y0.116
G01X0.720Y0.108
G01X0.724Y0.100
G01X0.726Y0.091
G01X0.727Y0.082
G01X0.726Y0.073
G01X0.697Y-0.091
G01X0.695Y-0.100
G01X0.691Y-0.108
G01X0.686Y-0.116
G01X0.679Y-0.122
G01X0.672Y-0.128
G01X0.663Y-0.132
G01X0.655Y-0.134
G01X0.645Y-0.135
G01X-0.645Y-0.135
G01X-0.655Y-0.134
G01X-0.663Y-0.132
G01X-0.672Y-0.128
G01X-0.679Y-0.122
G01X-0.686Y-0.116
G01X-0.691Y-0.109
G01X-0.695Y-0.100
G01X-0.697Y-0.091
G01X-0.726Y0.073
G01X-0.727Y0.082
G01X-0.726Y0.091
G01X-0.724Y0.100
G01X-0.720Y0.108
G01X-0.715Y0.116
G01X-0.708Y0.122
G01X-0.701Y0.128
G01X-0.692Y0.132
G01X-0.684Y0.134
G01X-0.674Y0.135
G01X0.674Y0.135
G01Z0.060
M05
G00X0.574Y0.045
G01Z-0.100
M03
G01X0.575Y0.058
G01X0.578Y0.071
G01X0.582Y0.083
G01X0.588Y0.095
G01X0.595Y0.106
G01X0.604Y0.115
G01X0.614Y0.124
G01X0.624Y0.131
G01X0.636Y0.137
G01X0.649Y0.141
G01X0.661Y0.144
G01X0.674Y0.145
G01X0.685Y0.144
G01X0.696Y0.141
G01X0.706Y0.136
G01X0.715Y0.130
G01X0.722Y0.122
G01X0.729Y0.113
G01X0.733Y0.104
G01X0.736Y0.093
G01X0.737Y0.082
G01X0.736Y0.071
G01X0.707Y-0.093
G01X0.704Y-0.104
G01X0.700Y-0.113
G01X0.693Y-0.122
G01X0.686Y-0.130
G01X0.677Y-0.136
G01X0.667Y-0.141
G01X0.656Y-0.144
G01X0.645Y-0.145
G01X-0.645Y-0.145
G01X-0.656Y-0.144
G01X-0.667Y-0.141
G01X-0.677Y-0.136
G01X-0.686Y-0.130
G01X-0.693Y-0.122
G01X-0.700Y-0.113
G01X-0.704Y-0.104
G01X-0.707Y-0.093
G01X-0.736Y0.071
G01X-0.737Y0.082
G01X-0.736Y0.093
G01X-0.733Y0.103
G01X-0.729Y0.113
G01X-0.722Y0.122
G01X-0.715Y0.130
G01X-0.706Y0.136
G01X-0.696Y0.141
G01X-0.685Y0.144
G01X-0.674Y0.145
G01X0.674Y0.145
G01Z0.060
M05
G00X0.000Y0.000
M02


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/