Re: G Code for 25 Pin D connector

--- In CAD_CAM_EDM_DRO@y..., "Peter Homann" <peter.homann@a...> wrote:

> Hi,
>
> I'm looking to put my controller board in an enclosure. Does anyone

have G

> Code for cutting out a hole for a 25 Pin D connector that they could

share?


Hi, here is one I have for the slot. The two mounting holes can be
drilled after. It is done with a 1/8" end mill and .1" deep. If you
need different parameters let me know and I can tweek it.

Dean

[DB25 HOLE]
[RAPID HEIGHT 0.060"]
[FEEDRATE 5]
[USE 1/8" ENDMILL]
[CUTTING DEPTH 0.10"]
[ORIGIN IN CENTER OF HOLE]
[0.1" LEAD IN]
[0.01" FINISH PASS]
G70
F5
G90
G01Z0.060
M05
G00X0.574Y0.035
G01Z-0.100
M03
G01X0.575Y0.048
G01X0.578Y0.061
G01X0.582Y0.073
G01X0.588Y0.085
G01X0.595Y0.096
G01X0.604Y0.106
G01X0.614Y0.114
G01X0.624Y0.121
G01X0.636Y0.127
G01X0.649Y0.131
G01X0.661Y0.134
G01X0.674Y0.135
G01X0.684Y0.134
G01X0.692Y0.132
G01X0.701Y0.128
G01X0.708Y0.122
G01X0.715Y0.116
G01X0.720Y0.108
G01X0.724Y0.100
G01X0.726Y0.091
G01X0.727Y0.082
G01X0.726Y0.073
G01X0.697Y-0.091
G01X0.695Y-0.100
G01X0.691Y-0.108
G01X0.686Y-0.116
G01X0.679Y-0.122
G01X0.672Y-0.128
G01X0.663Y-0.132
G01X0.655Y-0.134
G01X0.645Y-0.135
G01X-0.645Y-0.135
G01X-0.655Y-0.134
G01X-0.663Y-0.132
G01X-0.672Y-0.128
G01X-0.679Y-0.122
G01X-0.686Y-0.116
G01X-0.691Y-0.109
G01X-0.695Y-0.100
G01X-0.697Y-0.091
G01X-0.726Y0.073
G01X-0.727Y0.082
G01X-0.726Y0.091
G01X-0.724Y0.100
G01X-0.720Y0.108
G01X-0.715Y0.116
G01X-0.708Y0.122
G01X-0.701Y0.128
G01X-0.692Y0.132
G01X-0.684Y0.134
G01X-0.674Y0.135
G01X0.674Y0.135
G01Z0.060
M05
G00X0.574Y0.045
G01Z-0.100
M03
G01X0.575Y0.058
G01X0.578Y0.071
G01X0.582Y0.083
G01X0.588Y0.095
G01X0.595Y0.106
G01X0.604Y0.115
G01X0.614Y0.124
G01X0.624Y0.131
G01X0.636Y0.137
G01X0.649Y0.141
G01X0.661Y0.144
G01X0.674Y0.145
G01X0.685Y0.144
G01X0.696Y0.141
G01X0.706Y0.136
G01X0.715Y0.130
G01X0.722Y0.122
G01X0.729Y0.113
G01X0.733Y0.104
G01X0.736Y0.093
G01X0.737Y0.082
G01X0.736Y0.071
G01X0.707Y-0.093
G01X0.704Y-0.104
G01X0.700Y-0.113
G01X0.693Y-0.122
G01X0.686Y-0.130
G01X0.677Y-0.136
G01X0.667Y-0.141
G01X0.656Y-0.144
G01X0.645Y-0.145
G01X-0.645Y-0.145
G01X-0.656Y-0.144
G01X-0.667Y-0.141
G01X-0.677Y-0.136
G01X-0.686Y-0.130
G01X-0.693Y-0.122
G01X-0.700Y-0.113
G01X-0.704Y-0.104
G01X-0.707Y-0.093
G01X-0.736Y0.071
G01X-0.737Y0.082
G01X-0.736Y0.093
G01X-0.733Y0.103
G01X-0.729Y0.113
G01X-0.722Y0.122
G01X-0.715Y0.130
G01X-0.706Y0.136
G01X-0.696Y0.141
G01X-0.685Y0.144
G01X-0.674Y0.145
G01X0.674Y0.145
G01Z0.060
M05
G00X0.000Y0.000
M02