Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Posted by
Chris Baugher
on 2003-01-02 19:18:13 UTC
> Over-constraint of the motion causes binding, and with a flexibleI have a related question. Does a steel helical coupler offer any
> coupler, one end of the leadscrew is constrained (for tension and
> compression) while the other is 'free' to move a few fractions of a mm,
> relieving binding as the screw heats up, or the frame vibrates or
> the original alignment was off, or whatever.
advantage or disadvantage to a rubber coupler?
C|
Discussion Thread
dennis_kramer2001 <dennis.kramer@a...
2003-01-02 17:14:08 UTC
Belt vs. Direct Drive
Robert Campbell
2003-01-02 17:51:28 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Doug Fortune
2003-01-02 18:51:25 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Chris Baugher
2003-01-02 19:18:13 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Doug Fortune
2003-01-03 01:11:21 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Tony Jeffree <tony@j...
2003-01-03 01:17:12 UTC
Re: Belt vs. Direct Drive
jeffalanp <xylotex@h...
2003-01-03 01:19:14 UTC
Re: Belt vs. Direct Drive
torsten98001 <torsten@g...
2003-01-03 03:02:04 UTC
Re: Belt vs. Direct Drive
bjammin@i...
2003-01-03 07:26:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Marv Frankel
2003-01-03 08:06:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Garry & Maxine Foster
2003-01-03 08:27:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
CL
2003-01-03 10:58:51 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
CL
2003-01-03 11:23:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
alex
2003-01-03 11:34:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Tim Goldstein
2003-01-03 11:46:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Chris Baugher
2003-01-03 12:13:01 UTC
Re: [CAD_CAM_EDM_DRO] Belt vs. Direct Drive
Chris Baugher
2003-01-03 18:31:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
jeffalanp <xylotex@h...
2003-01-03 18:43:49 UTC
Re: Belt vs. Direct Drive
Tony Jeffree
2003-01-03 21:51:52 UTC
Re: Re: Belt vs. Direct Drive
Tony Jeffree
2003-01-03 22:14:42 UTC
Re: Re: Belt vs. Direct Drive
bjammin@i...
2003-01-04 00:00:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Belt vs. Direct Drive
Tim Goldstein
2003-01-04 10:38:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
alex
2003-01-04 16:24:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Ron Kline
2003-01-04 16:58:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
alex
2003-01-04 17:33:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
jwalters
2003-01-04 18:13:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Dave Kowalczyk <dkowalcz@d...
2003-01-04 18:53:19 UTC
Re: Belt vs. Direct Drive
Ron Kline
2003-01-04 20:11:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Jon Elson
2003-01-04 22:26:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
alex
2003-01-05 15:45:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Jon Elson
2003-01-05 23:12:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
alex
2003-01-08 08:12:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive
Jon Elson
2003-01-08 23:26:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Belt vs. Direct Drive