Re: [CAD_CAM_EDM_DRO] Bullet-Proof G201 / G210

At 21:13 08/02/2003 -0500, you wrote:

>One other thing which I have on one OLDER stepper-machine I have is the
>ability for the computer to "tell" the drive whether to HALF-STEP or
>FULL-STEP (i.e., DOUBLE the step-count per turn). Now, to do this, it is
>necessary to have access to the jumpers in the G210 (I understand the G201
>is 2000 steps/turn ONLY. ?) It'd be nice if there was a pin which could
>select N steps/turn or N*2 steps per turn, if LO or HI.

I agree - that would be useful too. I guess if Mariss makes the jumpers
settable from outside the box, then you will have external access to all
the jumper pins anyway, so this will be possible.


Regards,
Tony