Re: [CAD_CAM_EDM_DRO] Bullet-Proof G201 / G210

At 17:21 09/02/2003 -0500, you wrote:

> > The only thing I would add would be the ability to set the motor
> current by
> > providing an external reference voltage
>
>NOT me! Whew!

Actually a very useful thing to be able to do. This is exactly how I
control the motor current setting in my DivisionMaster indexer (see website
below), which allows software-based configuration of the controller's
current setting for whatever motor the owner wants to use, without having
to mess with resistors. All the operator has to do is to type in the
current setting on the setup screen. It also allows the operator to set the
motor's idle current to any chosen percentage of the motor current.


Regards,
Tony

http://www.divisionmaster.com