Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - for fun and learning
Posted by
JanRwl@A...
on 2003-09-02 20:43:38 UTC
In a message dated 9/2/2003 10:39:47 PM Central Standard Time,
davemucha@... writes:
so "squeezing" the nut very carefully DOES work! (This trick works best with
Turcite nuts, with home-brew addition of "squeeze mechanism or screw, etc.!)
Jan Rowland
[Non-text portions of this message have been removed]
davemucha@... writes:
> Since ACME is not a taper, jsut squeezing the nut does notGOOD point, and why I like "stub-ACME" which DOES have the slightest taper,
> automatically mean a tighter fit...
>
so "squeezing" the nut very carefully DOES work! (This trick works best with
Turcite nuts, with home-brew addition of "squeeze mechanism or screw, etc.!)
Jan Rowland
[Non-text portions of this message have been removed]
Discussion Thread
Chuck Knight
2003-08-31 00:31:52 UTC
Modifying an X-Y table
Peter L. Peres
2003-08-31 14:20:34 UTC
Re: [CAD_CAM_EDM_DRO] Modifying an X-Y table
Chuck Knight
2003-08-31 19:26:13 UTC
Re: [CAD_CAM_EDM_DRO] Modifying an X-Y table
Jeff Demand
2003-08-31 19:53:42 UTC
Re: Modifying an X-Y table
sam sokolik
2003-08-31 20:10:22 UTC
Re: [CAD_CAM_EDM_DRO] Modifying an X-Y table
ccq@x...
2003-08-31 21:48:16 UTC
Re: [CAD_CAM_EDM_DRO] Modifying an X-Y table
Chuck Knight
2003-08-31 21:54:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table
sam sokolik
2003-08-31 22:27:26 UTC
Re: [CAD_CAM_EDM_DRO] Modifying an X-Y table
grantfair2001
2003-08-31 23:34:50 UTC
Re: Modifying an X-Y table
Robb Greathouse
2003-09-01 13:32:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table
ballendo
2003-09-02 04:50:02 UTC
Re: Modifying an X-Y table
turbulatordude
2003-09-02 07:50:34 UTC
Re: Modifying an X-Y table - ACME
Chuck Knight
2003-09-02 19:16:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME
turbulatordude
2003-09-02 20:37:48 UTC
Re: Modifying an X-Y table - ACME - for fun and learning
JanRwl@A...
2003-09-02 20:43:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - for fun and learning
m0nkey0ne
2003-09-03 01:26:21 UTC
Re: Modifying an X-Y table - ACME - for fun and learning
turbulatordude
2003-09-03 06:57:50 UTC
Re: Modifying an X-Y table - ACME - EPOXY
Peter L. Peres
2003-09-03 07:39:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table
ccq@x...
2003-09-03 10:10:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - EPOXY
Chris Baugher
2003-09-03 11:27:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - EPOXY
Chuck Knight
2003-09-03 16:28:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - EPOXY
ballendo
2003-09-04 03:56:10 UTC
Re: Modifying an X-Y table - ACME - for fun and learning
ballendo
2003-09-04 04:01:45 UTC
Re: Modifying an X-Y table
turbulatordude
2003-09-04 06:11:52 UTC
Re: Modifying an X-Y table - ACME - for fun and learning
Chuck Knight
2003-09-04 10:14:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - for fun and learning
sam sokolik
2003-09-04 10:36:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - for fun and learning
turbulatordude
2003-09-04 16:17:44 UTC
Re: Modifying an X-Y table - ACME - for fun and learning
Tim Goldstein
2003-09-04 16:36:03 UTC
RE: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - for fun and learning
JanRwl@A...
2003-09-04 20:57:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - for fun and learning
Chuck Knight
2003-09-04 22:50:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - for fun and learning
JanRwl@A...
2003-09-05 13:11:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Modifying an X-Y table - ACME - for fun and learning