Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Posted by
Weyland
on 2003-09-22 11:24:23 UTC
On Monday 22 September 2003 02:13 pm, Jon Elson spake:
clicks as well, but I'll check in a few hours and write back.
Best,
Weyland
> What is your MAX_ACCELERATION parameter set to in the .ini file?8.0
> >Another tidbit is that if I set the axis speed or feed override too high,Hmmmmm... I *think* it was happening with mouse
> > and actually get an axis to jog, that it will continue to move after
> > releasing the key or mouse click, and most often in the opposite
> > direction.
>
> I've never seen this related to speed. I do know it is possible by
> bobbling on
> the arrow keys to get it moving without holding a key down. Pressing a
> key for that axis and releasing it will reset the key press reding code in
> the GUI. (The problem is the way keyboard press and release messages are
> sent by the keyboards when you hit several keys at once.)
clicks as well, but I'll check in a few hours and write back.
Best,
Weyland
Discussion Thread
Weyland Smith
2003-09-16 21:38:38 UTC
Things to check? Crispy Fried Geckos? No motion...
Tim Goldstein
2003-09-16 22:11:53 UTC
RE: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
Weyland
2003-09-16 22:51:40 UTC
Re: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
Tim Goldstein
2003-09-16 23:07:26 UTC
RE: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
turbulatordude
2003-09-17 05:03:31 UTC
Re: Things to check? Crispy Fried Geckos? No motion...
James Cullins
2003-09-17 06:30:51 UTC
Re: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
James Cullins
2003-09-17 06:30:51 UTC
Re: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
Tim Goldstein
2003-09-17 07:53:25 UTC
RE: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
Jon Elson
2003-09-17 10:37:38 UTC
Re: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
Alan Marconett KM6VV
2003-09-17 10:39:02 UTC
Re: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
Alan Marconett KM6VV
2003-09-17 11:11:18 UTC
Re: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
Tim Goldstein
2003-09-17 12:08:59 UTC
RE: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
James Cullins
2003-09-17 12:32:37 UTC
Re: [CAD_CAM_EDM_DRO] Things to check? Crispy Fried Geckos? No motion...
Weyland
2003-09-17 19:45:49 UTC
Thanks - was: Things to check? is now: RUNNING~!
Jon Elson
2003-09-17 22:31:38 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Tim Goldstein
2003-09-17 22:39:00 UTC
RE: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-18 06:46:45 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-18 06:59:02 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
turbulatordude
2003-09-18 07:51:25 UTC
Re: Thanks - was: Things to check? is now: RUNNING~!
Tim Goldstein
2003-09-18 08:09:15 UTC
RE: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-18 08:14:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Statman Designs, LLC
2003-09-18 08:26:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Jon Elson
2003-09-18 08:41:10 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
turbulatordude
2003-09-18 08:41:37 UTC
Re: Thanks - was: Things to check? is now: RUNNING~!
Jon Elson
2003-09-18 08:53:18 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Jon Elson
2003-09-18 08:54:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
turbulatordude
2003-09-18 09:15:51 UTC
Re: Thanks - was: Things to check? is now: - resoulution
sam sokolik
2003-09-18 10:28:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-19 20:57:49 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-19 21:01:46 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-19 21:04:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-19 21:11:09 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-19 21:16:16 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
JanRwl@A...
2003-09-19 21:19:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-19 21:21:03 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-19 21:25:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-19 21:34:05 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-19 21:36:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Antonius J.M. Groothuizen
2003-09-19 22:02:37 UTC
Re: Thanks - was: Things to check? is now: RUNNING~!
Tim Goldstein
2003-09-19 22:06:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Tim Goldstein
2003-09-19 22:06:08 UTC
RE: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Tim Goldstein
2003-09-19 22:06:13 UTC
RE: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Tim Goldstein
2003-09-19 22:06:23 UTC
RE: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Jon Elson
2003-09-19 23:52:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
turbulatordude
2003-09-20 07:41:36 UTC
Re: Thanks - was: Things to check? back to basics - please
Weyland
2003-09-20 20:19:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-20 20:43:44 UTC
Re: [CAD_CAM_EDM_DRO] Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-20 21:14:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Jon Elson
2003-09-21 09:26:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-22 09:31:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Jon Elson
2003-09-22 11:14:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-22 11:24:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Jon Elson
2003-09-22 20:46:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!
Weyland
2003-09-22 22:07:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thanks - was: Things to check? is now: RUNNING~!