Sherline vs. Taig head was Re: Has anybody tried BobCad software?
Posted by
ballendo
on 2004-02-21 06:41:09 UTC
Bill,
It's a bit of a different animal... Obviously bigger/heavier to
support the R8 spindle. The motor control is the same as that used in
the 7x10-12 minilathes, and many folks have burned theirs up. A few
more than once! The plastic Hi/lo gears are also frequent replacement
items.
Beyond that, I'll let others comment...
Ballendo
It's a bit of a different animal... Obviously bigger/heavier to
support the R8 spindle. The motor control is the same as that used in
the 7x10-12 minilathes, and many folks have burned theirs up. A few
more than once! The plastic Hi/lo gears are also frequent replacement
items.
Beyond that, I'll let others comment...
Ballendo
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Bill Vance <ccq@x> wrote:
> Anyone know how well the mini-mill MT/R8 heads/other parts stack up
with these?
>
> Bill
>
>
> On Fri Feb 20 02:39:00 2004 ballendo wrote:
>
> >Ron,
> >
> >Several things, really.
> >
> >Most important is the motor and drive that comes with it.
Universal
> >input--ac,dc,90-250v-- speed controlled dc motor. Motor mounting
is
> >MUCH better than the Taig(just look at the pics of each on the
Mfr's
> >sites...)
> >
> >Next, although the taig and sherline both use 3/4-16 threads, they
> >are slightly different in the lengths of various features. And
> >sherline, IMO has a better selection--and better quality-- of
spindle
> >related accessories.
> >
> >The Sherline has a 10K RPM option. I don't know if Taig does. But
if
> >they do, I'd again question their motor and it's terrible mounting.
> >
> >And finally, the sherline is the head that Joe Vicar used to
develop
> >his auto tool changer. He's working on adapting it to other heads,
> >but there's something to be said for using what it was made on/for.
> >
> >Against this, if you don't mind the lower fit and finish of the
> >items, you can get spindle accessories from Taig at lower cost
than
> >from sherline. (But I read earlier tonight 2 comments about what
to
> >do to make the taig 3 jaw chuck grip steel 1-1/2" firmly; the
single
> >response said, (paraphrased)"I don't know either. I just take
light
> >cuts and deal with it" Now the question is not about lathes, but
this
> >question/answer is in line with my personal experience of taig vs.
> >sherline parts. (They both work; but the sherline QC and finish is
> >better, IMO.)
> >
> >And only an opinion, but in that opinion, Sherline is a better
> >company to deal with...
> >
> >Ballendo
> >
> >P.S. Paul over at www.cnconabudget.com is offering adapters to
mount
> >the Sherline Head to the Taig. Based on the response, I'd say I'm
not
> >alone in feeling that the Sherline head is overall superior to the
> >Taig. (But the Taig is superior to the sherline for steel cutting,
> >IMO.)
> >
> >
> >--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Ron Thompson"
> ><barebooger@c...> wrote:
> >> What is the advantage to the Sherline head?
> >>
> >> Ron Thompson
> >> Was On the Beautiful Mississippi Gulf Coast,
> >> Now On the Beautiful Florida Space Coast, right beside the
Kennedy
> >Space Center, USA
> >>
> >> http://www.plansandprojects.com
> >>
> >> The ultimate result of shielding men from the effects of folly is
> >> to fill the world with fools.
> >> --Herbert Spencer, English Philosopher (1820-1903)
> >> ----- Original Message -----
> >> From: ballendo
> >> To: CAD_CAM_EDM_DRO@yahoogroups.com
> >> Sent: Thursday, February 19, 2004 1:47 AM
> >> Subject: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad
software?
> >>
> >>
> >> Hello,
> >>
> >> I'd look at the Taig mill, with a sherline head...
> >>
> >> We just discussed this either here in CCED, or over at the DIY-
> >CNC
> >> yahoo group...
> >>
> >> Ballendo
> >>
> >> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Buck Sisson"
<buck@r...>
> >> wrote:
> >> > I am trying to get started on a CNC milling system and am
> >concerned
> >> > about alot of things? As usual I am trying to keep the costs
> >down
> >> but
> >> > still windup with a system that I can use.
> >> > It seems that several different sources of CAD softare have
> >been
> >> > tried out by this group and I would like some suggetions as
to
> >what
> >> I
> >> > need to get started with. I have been looking at the
Sherline
> >8020
> >> > mill package and am a little worried about its ability to
> >machine
> >> > mild steel.
> >> > Any ideas???
>
> --
>
**********************************************************************
**********
> * *
> RKBA! * Blessings on thee, oh Israel!!!
* 4-19!
> * *
>
**********************************************************************
**********
>
> An _EFFECTIVE_ | Insured by | All Matter is vibration. | Let he
who hath no
> weapon in every | by Colt; | --Max Planck | weapon,
sell his
> hand = Freedom | Dial | In the beginning was the | garment,
and buy a
> on every side!! | 1-1911-A1 | Word. --The Holy Bible | sword. --
Jesus Christ
>
>
**********************************************************************
**********
>
> Constitutional Government is dead! LONG LIVE THE
CONSTITUTION!!!!!!
>
>
**********************************************************************
**********
Discussion Thread
Buck Sisson
2004-02-18 19:55:41 UTC
Has anybody tried BobCad software?
ibewgypsie
2004-02-19 02:00:28 UTC
Re: Has anybody tried BobCad software?
Mike Mueller
2004-02-19 07:34:16 UTC
Re: Has anybody tried BobCad software?
ballendo
2004-02-19 08:09:51 UTC
Re: Has anybody tried BobCad software?
Fred Smith
2004-02-19 08:11:01 UTC
Re: Try Vector instead, was Has anybody tried BobCad software?
metlmunchr
2004-02-19 08:36:21 UTC
Re: Has anybody tried BobCad software?
Jon Elson
2004-02-19 08:51:30 UTC
Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software?
Ron Thompson
2004-02-19 18:37:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software?
ballendo
2004-02-20 06:51:16 UTC
Sherline vs. Taig head was Re: Has anybody tried BobCad software?
Bill Vance
2004-02-20 07:18:57 UTC
Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head was Re: Has anybody tried BobCad software?
Ron Thompson
2004-02-20 08:22:57 UTC
Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head was Re: Has anybody tried BobCad software?
Jon Elson
2004-02-20 09:47:22 UTC
Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head was Re: Has anybody tried BobCad software?
CV Desper
2004-02-20 09:53:50 UTC
Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head was Re: Has anybody tried BobCad software?
xlch58@s...
2004-02-20 18:50:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software?
Myron Cherry
2004-02-20 23:29:28 UTC
Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software?
Michael Milligan
2004-02-21 01:12:13 UTC
RE: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software?
james_cullins@s...
2004-02-21 06:18:27 UTC
Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software?
ballendo
2004-02-21 06:41:09 UTC
Sherline vs. Taig head was Re: Has anybody tried BobCad software?
ballendo
2004-02-21 06:41:13 UTC
Sherline vs. Taig head
turbulatordude
2004-02-21 06:47:35 UTC
Re: Sherline vs. Taig head
Michael Milligan
2004-02-21 06:58:10 UTC
RE: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software?
Ron Thompson
2004-02-21 07:09:30 UTC
Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head
james_cullins@s...
2004-02-21 07:17:48 UTC
Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software?
james_cullins@s...
2004-02-21 07:24:31 UTC
Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software?
Harvey White
2004-02-21 11:53:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline vs. Taig head
metlmunchr
2004-02-21 12:07:57 UTC
Re: Has anybody tried BobCad software?
Bill Vance
2004-02-21 15:12:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline vs. Taig head
stevenson_engineers
2004-02-22 06:05:56 UTC
Re: Has anybody tried BobCad software?
Statman Designs, LLC
2004-02-22 06:25:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software?
Robin Szemeti
2004-02-22 06:49:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software?
Ron Thompson
2004-02-22 07:04:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software?
stevenson_engineers
2004-02-22 07:37:27 UTC
Re: Has anybody tried BobCad software?
Jon Elson
2004-02-22 10:59:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software?
Statman Designs, LLC
2004-02-22 11:23:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software?
wanliker@a...
2004-02-22 20:31:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software?