CAD CAM EDM DRO - Yahoo Group Archive

Re: Sherline vs. Taig head

on 2004-02-21 06:47:35 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "ballendo" <ballendo@y...>
wrote:
> The sherline headstock assy. is $102.
>
> Does the taig include a pulley? (With Taig you better be sure
EXACTLY
> what you're getting at any given price.)
>
> This is not a bad thing; just that taig has often set real low
prices
> which don;t include everything needed to begin. The classic case is
> their lathe. Cheap price. No motor, no pulley, no tailstock, etc.
> Again, if they want to do this that's fine. and it is just a
business
> or marketing decision. But others should know that if you're
> comparing apples, you need to have apples, and not an orange that
> looks like an apple...
>
> The sherline motor assy is $210.
>
> And the whole headstock with motor and speed control is $300 for
low
> rpm, and $380 for 10K RPM.
>
> And note that these prices were recently increased after many years
> at the "old" prices.
>
> Hope this informs,
>
> Ballendo
>
> P.S. What (exactly) do you get for the 60 bucks?


I had looked at some of the options and came across the Sherline, but
the people selling the stuff never made it clear exactly what was
included.

I thought the Taig was not as large capacity, not sure exactly....

LittleMachineShop sells a complete Mini-Mill head/motor/speed control
for around $250 (at last look) and that uses 5C larger collets and a
pretty large motor.

Paul of CNC on a budget sells complete Z axies or components.

I never took the time to put together a list of to create a
comparison so maybe a couple of youse guyes who have done a complete
assemble of a purchesed Axis or spindle can offer some of the more
elusive details ???

Dave

Discussion Thread

Buck Sisson 2004-02-18 19:55:41 UTC Has anybody tried BobCad software? ibewgypsie 2004-02-19 02:00:28 UTC Re: Has anybody tried BobCad software? Mike Mueller 2004-02-19 07:34:16 UTC Re: Has anybody tried BobCad software? ballendo 2004-02-19 08:09:51 UTC Re: Has anybody tried BobCad software? Fred Smith 2004-02-19 08:11:01 UTC Re: Try Vector instead, was Has anybody tried BobCad software? metlmunchr 2004-02-19 08:36:21 UTC Re: Has anybody tried BobCad software? Jon Elson 2004-02-19 08:51:30 UTC Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software? Ron Thompson 2004-02-19 18:37:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software? ballendo 2004-02-20 06:51:16 UTC Sherline vs. Taig head was Re: Has anybody tried BobCad software? Bill Vance 2004-02-20 07:18:57 UTC Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head was Re: Has anybody tried BobCad software? Ron Thompson 2004-02-20 08:22:57 UTC Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head was Re: Has anybody tried BobCad software? Jon Elson 2004-02-20 09:47:22 UTC Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head was Re: Has anybody tried BobCad software? CV Desper 2004-02-20 09:53:50 UTC Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head was Re: Has anybody tried BobCad software? xlch58@s... 2004-02-20 18:50:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software? Myron Cherry 2004-02-20 23:29:28 UTC Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software? Michael Milligan 2004-02-21 01:12:13 UTC RE: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software? james_cullins@s... 2004-02-21 06:18:27 UTC Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software? ballendo 2004-02-21 06:41:09 UTC Sherline vs. Taig head was Re: Has anybody tried BobCad software? ballendo 2004-02-21 06:41:13 UTC Sherline vs. Taig head turbulatordude 2004-02-21 06:47:35 UTC Re: Sherline vs. Taig head Michael Milligan 2004-02-21 06:58:10 UTC RE: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software? Ron Thompson 2004-02-21 07:09:30 UTC Re: [CAD_CAM_EDM_DRO] Sherline vs. Taig head james_cullins@s... 2004-02-21 07:17:48 UTC Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software? james_cullins@s... 2004-02-21 07:24:31 UTC Re: [CAD_CAM_EDM_DRO] Has anybody tried BobCad software? Harvey White 2004-02-21 11:53:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline vs. Taig head metlmunchr 2004-02-21 12:07:57 UTC Re: Has anybody tried BobCad software? Bill Vance 2004-02-21 15:12:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Sherline vs. Taig head stevenson_engineers 2004-02-22 06:05:56 UTC Re: Has anybody tried BobCad software? Statman Designs, LLC 2004-02-22 06:25:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software? Robin Szemeti 2004-02-22 06:49:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software? Ron Thompson 2004-02-22 07:04:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software? stevenson_engineers 2004-02-22 07:37:27 UTC Re: Has anybody tried BobCad software? Jon Elson 2004-02-22 10:59:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software? Statman Designs, LLC 2004-02-22 11:23:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software? wanliker@a... 2004-02-22 20:31:02 UTC Re: [CAD_CAM_EDM_DRO] Re: Has anybody tried BobCad software?