CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: help

Posted by Art Eckstein
on 2004-07-20 07:12:34 UTC
Gary,,
WHICH version of Turbocnc did you download???

If it is the "official 3.1a" version from the website, I believe there are
known bugs in the G02/03 coding.

You need version 3.25 or a variant of that to do proper G03/03 codes and it
can be had from the

http://groups.yahoo.com/group/turbocnc/

group in the files section. If you are not a registered user, of course you
will have to do that also.

Art

At 09:51 AM 7/20/2004, you wrote:
>Thanks Fred, but that did not work either. IT still cuts a crazy zig
>zag pattern. Its as though Tcnc is ignoring the G03 code and cutting
>a straight line instead.
>
>The doc's I have on Turbocnc state ( The "{dakcnc3.0}" header must be
>present as the first line of the file). Also the file extendsion
>is .cnc not .dnc. That's why I was using note pad.
>
>Sorry about the typo. Ring finger missing from left hand.....
>
>BTW, Anyone insterested I have posted links for the aluminum
>extrusion I used on my CNC Router on my web page. Enjoy.
>
>Gary
>
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Fred Smith" <imserv@v...>
>wrote:
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Gary Davison" <gld2@c...>
> > wrote:
> >
> >
> > >This time I get a zig zag
> > > rectangle.
> >
> > I backplotted your CNC file in Vector Cad Cam. Other than the fact
> > that you are cutting all the contours at Z=+.062 above the work
> > piece, it backplots pretty good
> >
> > N0007 G01 X-0.2807 Y0.5390 Z0.0625 F10.0 (this is the offending
>line)
> >
> > I then regenerated the program from the backplotted geometry, using
> > our proven Vector TurboCNC post and it duplicated your G-code file.
> >
> > It sounds like you have a configuration problem with your
>Turbocnc.
> > Others running turbocnc can use your file, or at least the G-code
> > portions of it.
> >
> > You may want to change the beginning of your program to something
> > more palatable for TCNC, something more like this:
> >
> > (1234)
> > N410 G17(X-Y Plane Selection for Arcs)
> > N420 G20(inch units)
> > N430 G90(Absolute mode)
> > N440 T1 F10
> > N450 M03
> >
> > Fred Smith - IMService
>

Bubba

OLDER THAN DIRT
Country Bubba
(Actually the inventor of Country and Bubba)
In God We Trust

axtein@...
LaGrange, GA

http://ns1.dicomm.net/~axtein/dro


[Non-text portions of this message have been removed]

Discussion Thread

Ros 2000-03-25 21:40:26 UTC help riet91@y... 2001-08-09 02:26:28 UTC help mabw 2002-05-26 17:18:54 UTC re:help William Scalione 2003-03-15 11:27:15 UTC Re: [CAD_CAM_EDM_DRO] help Richard 2003-03-15 11:44:30 UTC Re: help Mariss Freimanis 2003-03-15 12:10:03 UTC Re: help frank_kandl 2003-09-10 07:34:42 UTC help Jon Elson 2003-09-10 09:41:53 UTC Re: [CAD_CAM_EDM_DRO] help Michael Milligan 2003-09-10 16:16:19 UTC RE: [CAD_CAM_EDM_DRO] Dolphin CAD CAM Plus Mach2 Mill Gary Davison 2004-07-19 18:58:56 UTC help Andy Wander 2004-07-19 19:20:50 UTC RE: [CAD_CAM_EDM_DRO] help Gary Davison 2004-07-19 19:33:49 UTC Re: help Fred Smith 2004-07-19 20:29:43 UTC Re: help Fred Smith 2004-07-19 20:47:12 UTC Re: help Gary Davison 2004-07-20 06:51:28 UTC Re: help Art Eckstein 2004-07-20 07:12:34 UTC Re: [CAD_CAM_EDM_DRO] Re: help Gary Davison 2004-07-20 08:12:10 UTC Re: help Alan Marconett 2004-07-20 09:29:25 UTC Re: [CAD_CAM_EDM_DRO] Re: help Art Eckstein 2004-07-20 11:06:53 UTC Re: [CAD_CAM_EDM_DRO] Re: help Alan Marconett 2004-07-20 11:23:12 UTC Re: [CAD_CAM_EDM_DRO] Re: help Gary Davison 2004-07-20 15:09:06 UTC Re: help Andy Wander 2004-07-20 15:28:22 UTC RE: [CAD_CAM_EDM_DRO] Re: help