RE: [CAD_CAM_EDM_DRO] Re: help

That'll certainly work if your goal is just to get this one part made.

If you want to use CNC in the future, I encourage to keep trying to figure
out what's wrong.

Andy Wander
Verrex Corporation


-----Original Message-----
From: Gary Davison [mailto:gld2@...]
Sent: Tuesday, July 20, 2004 6:09 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: help

OK I changed to a incremental and that doesn't work either.

Tried executing one line of code at a time ,as generated by Deskcnc,
in Kcam and Turbocnc. The machine will do a small arc and then take
off in a straight line. It would run clear off the table if I let it.

Many thanks to all who have tied to help. I guess I'll just print the
dxf and glue onto wood and saw out by hand.

Gary




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links