Re: help
Posted by
Gary Davison
on 2004-07-20 15:09:06 UTC
OK I changed to a incremental and that doesn't work either.
Tried executing one line of code at a time ,as generated by Deskcnc,
in Kcam and Turbocnc. The machine will do a small arc and then take
off in a straight line. It would run clear off the table if I let it.
Many thanks to all who have tied to help. I guess I'll just print the
dxf and glue onto wood and saw out by hand.
Gary
Tried executing one line of code at a time ,as generated by Deskcnc,
in Kcam and Turbocnc. The machine will do a small arc and then take
off in a straight line. It would run clear off the table if I let it.
Many thanks to all who have tied to help. I guess I'll just print the
dxf and glue onto wood and saw out by hand.
Gary
Discussion Thread
Ros
2000-03-25 21:40:26 UTC
help
riet91@y...
2001-08-09 02:26:28 UTC
help
mabw
2002-05-26 17:18:54 UTC
re:help
William Scalione
2003-03-15 11:27:15 UTC
Re: [CAD_CAM_EDM_DRO] help
Richard
2003-03-15 11:44:30 UTC
Re: help
Mariss Freimanis
2003-03-15 12:10:03 UTC
Re: help
frank_kandl
2003-09-10 07:34:42 UTC
help
Jon Elson
2003-09-10 09:41:53 UTC
Re: [CAD_CAM_EDM_DRO] help
Michael Milligan
2003-09-10 16:16:19 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin CAD CAM Plus Mach2 Mill
Gary Davison
2004-07-19 18:58:56 UTC
help
Andy Wander
2004-07-19 19:20:50 UTC
RE: [CAD_CAM_EDM_DRO] help
Gary Davison
2004-07-19 19:33:49 UTC
Re: help
Fred Smith
2004-07-19 20:29:43 UTC
Re: help
Fred Smith
2004-07-19 20:47:12 UTC
Re: help
Gary Davison
2004-07-20 06:51:28 UTC
Re: help
Art Eckstein
2004-07-20 07:12:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Gary Davison
2004-07-20 08:12:10 UTC
Re: help
Alan Marconett
2004-07-20 09:29:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Art Eckstein
2004-07-20 11:06:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Alan Marconett
2004-07-20 11:23:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Gary Davison
2004-07-20 15:09:06 UTC
Re: help
Andy Wander
2004-07-20 15:28:22 UTC
RE: [CAD_CAM_EDM_DRO] Re: help