Re: help
Posted by
Gary Davison
on 2004-07-20 06:51:28 UTC
Thanks Fred, but that did not work either. IT still cuts a crazy zig
zag pattern. Its as though Tcnc is ignoring the G03 code and cutting
a straight line instead.
The doc's I have on Turbocnc state ( The "{dakcnc3.0}" header must be
present as the first line of the file). Also the file extendsion
is .cnc not .dnc. That's why I was using note pad.
Sorry about the typo. Ring finger missing from left hand.....
BTW, Anyone insterested I have posted links for the aluminum
extrusion I used on my CNC Router on my web page. Enjoy.
Gary
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Fred Smith" <imserv@v...>
wrote:
zag pattern. Its as though Tcnc is ignoring the G03 code and cutting
a straight line instead.
The doc's I have on Turbocnc state ( The "{dakcnc3.0}" header must be
present as the first line of the file). Also the file extendsion
is .cnc not .dnc. That's why I was using note pad.
Sorry about the typo. Ring finger missing from left hand.....
BTW, Anyone insterested I have posted links for the aluminum
extrusion I used on my CNC Router on my web page. Enjoy.
Gary
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Fred Smith" <imserv@v...>
wrote:
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Gary Davison" <gld2@c...>line)
> wrote:
>
>
> >This time I get a zig zag
> > rectangle.
>
> I backplotted your CNC file in Vector Cad Cam. Other than the fact
> that you are cutting all the contours at Z=+.062 above the work
> piece, it backplots pretty good
>
> N0007 G01 X-0.2807 Y0.5390 Z0.0625 F10.0 (this is the offending
>Turbocnc.
> I then regenerated the program from the backplotted geometry, using
> our proven Vector TurboCNC post and it duplicated your G-code file.
>
> It sounds like you have a configuration problem with your
> Others running turbocnc can use your file, or at least the G-code
> portions of it.
>
> You may want to change the beginning of your program to something
> more palatable for TCNC, something more like this:
>
> (1234)
> N410 G17(X-Y Plane Selection for Arcs)
> N420 G20(inch units)
> N430 G90(Absolute mode)
> N440 T1 F10
> N450 M03
>
> Fred Smith - IMService
Discussion Thread
Ros
2000-03-25 21:40:26 UTC
help
riet91@y...
2001-08-09 02:26:28 UTC
help
mabw
2002-05-26 17:18:54 UTC
re:help
William Scalione
2003-03-15 11:27:15 UTC
Re: [CAD_CAM_EDM_DRO] help
Richard
2003-03-15 11:44:30 UTC
Re: help
Mariss Freimanis
2003-03-15 12:10:03 UTC
Re: help
frank_kandl
2003-09-10 07:34:42 UTC
help
Jon Elson
2003-09-10 09:41:53 UTC
Re: [CAD_CAM_EDM_DRO] help
Michael Milligan
2003-09-10 16:16:19 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin CAD CAM Plus Mach2 Mill
Gary Davison
2004-07-19 18:58:56 UTC
help
Andy Wander
2004-07-19 19:20:50 UTC
RE: [CAD_CAM_EDM_DRO] help
Gary Davison
2004-07-19 19:33:49 UTC
Re: help
Fred Smith
2004-07-19 20:29:43 UTC
Re: help
Fred Smith
2004-07-19 20:47:12 UTC
Re: help
Gary Davison
2004-07-20 06:51:28 UTC
Re: help
Art Eckstein
2004-07-20 07:12:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Gary Davison
2004-07-20 08:12:10 UTC
Re: help
Alan Marconett
2004-07-20 09:29:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Art Eckstein
2004-07-20 11:06:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Alan Marconett
2004-07-20 11:23:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Gary Davison
2004-07-20 15:09:06 UTC
Re: help
Andy Wander
2004-07-20 15:28:22 UTC
RE: [CAD_CAM_EDM_DRO] Re: help