Re: help
Posted by
Gary Davison
on 2004-07-20 08:12:10 UTC
Trubocnc 300
Gary
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Art Eckstein <axtein@d...>
wrote:
Gary
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Art Eckstein <axtein@d...>
wrote:
> Gary,,there are
> WHICH version of Turbocnc did you download???
>
> If it is the "official 3.1a" version from the website, I believe
> known bugs in the G02/03 coding.codes and it
>
> You need version 3.25 or a variant of that to do proper G03/03
> can be had from thecourse you
>
> http://groups.yahoo.com/group/turbocnc/
>
> group in the files section. If you are not a registered user, of
> will have to do that also.zig
>
> Art
>
> At 09:51 AM 7/20/2004, you wrote:
> >Thanks Fred, but that did not work either. IT still cuts a crazy
> >zag pattern. Its as though Tcnc is ignoring the G03 code andcutting
> >a straight line instead.be
> >
> >The doc's I have on Turbocnc state ( The "{dakcnc3.0}" header must
> >present as the first line of the file). Also the file extendsion<gld2@c...>
> >is .cnc not .dnc. That's why I was using note pad.
> >
> >Sorry about the typo. Ring finger missing from left hand.....
> >
> >BTW, Anyone insterested I have posted links for the aluminum
> >extrusion I used on my CNC Router on my web page. Enjoy.
> >
> >Gary
> >
> >
> >--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Fred Smith" <imserv@v...>
> >wrote:
> > > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "Gary Davison"
> > > wrote:fact
> > >
> > >
> > > >This time I get a zig zag
> > > > rectangle.
> > >
> > > I backplotted your CNC file in Vector Cad Cam. Other than the
> > > that you are cutting all the contours at Z=+.062 above the workusing
> > > piece, it backplots pretty good
> > >
> > > N0007 G01 X-0.2807 Y0.5390 Z0.0625 F10.0 (this is the offending
> >line)
> > >
> > > I then regenerated the program from the backplotted geometry,
> > > our proven Vector TurboCNC post and it duplicated your G-codefile.
> > >code
> > > It sounds like you have a configuration problem with your
> >Turbocnc.
> > > Others running turbocnc can use your file, or at least the G-
> > > portions of it.something
> > >
> > > You may want to change the beginning of your program to
> > > more palatable for TCNC, something more like this:
> > >
> > > (1234)
> > > N410 G17(X-Y Plane Selection for Arcs)
> > > N420 G20(inch units)
> > > N430 G90(Absolute mode)
> > > N440 T1 F10
> > > N450 M03
> > >
> > > Fred Smith - IMService
> >
>
> Bubba
>
> OLDER THAN DIRT
> Country Bubba
> (Actually the inventor of Country and Bubba)
> In God We Trust
>
> axtein@d...
> LaGrange, GA
>
> http://ns1.dicomm.net/~axtein/dro
>
>
> [Non-text portions of this message have been removed]
Discussion Thread
Ros
2000-03-25 21:40:26 UTC
help
riet91@y...
2001-08-09 02:26:28 UTC
help
mabw
2002-05-26 17:18:54 UTC
re:help
William Scalione
2003-03-15 11:27:15 UTC
Re: [CAD_CAM_EDM_DRO] help
Richard
2003-03-15 11:44:30 UTC
Re: help
Mariss Freimanis
2003-03-15 12:10:03 UTC
Re: help
frank_kandl
2003-09-10 07:34:42 UTC
help
Jon Elson
2003-09-10 09:41:53 UTC
Re: [CAD_CAM_EDM_DRO] help
Michael Milligan
2003-09-10 16:16:19 UTC
RE: [CAD_CAM_EDM_DRO] Dolphin CAD CAM Plus Mach2 Mill
Gary Davison
2004-07-19 18:58:56 UTC
help
Andy Wander
2004-07-19 19:20:50 UTC
RE: [CAD_CAM_EDM_DRO] help
Gary Davison
2004-07-19 19:33:49 UTC
Re: help
Fred Smith
2004-07-19 20:29:43 UTC
Re: help
Fred Smith
2004-07-19 20:47:12 UTC
Re: help
Gary Davison
2004-07-20 06:51:28 UTC
Re: help
Art Eckstein
2004-07-20 07:12:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Gary Davison
2004-07-20 08:12:10 UTC
Re: help
Alan Marconett
2004-07-20 09:29:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Art Eckstein
2004-07-20 11:06:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Alan Marconett
2004-07-20 11:23:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: help
Gary Davison
2004-07-20 15:09:06 UTC
Re: help
Andy Wander
2004-07-20 15:28:22 UTC
RE: [CAD_CAM_EDM_DRO] Re: help