CNC Without a PC for Amish
Posted by
ronbiblio
on 2005-12-22 09:48:10 UTC
Hi:
We have an Amish neighbor who runs a machine tool shop.
He is seeking some sort of stand alone motion controller that could be
programed using G Code (via a word processor in ASCII).
Does anybody have any suggestions or ideas?
Thanks, Ron
Kinzers, PA 17535
Internet: RareBooks@...
We have an Amish neighbor who runs a machine tool shop.
He is seeking some sort of stand alone motion controller that could be
programed using G Code (via a word processor in ASCII).
Does anybody have any suggestions or ideas?
Thanks, Ron
Kinzers, PA 17535
Internet: RareBooks@...
Discussion Thread
ronbiblio
2005-12-22 09:48:10 UTC
CNC Without a PC for Amish
Jeff Goldberg
2005-12-22 09:59:07 UTC
RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
STAN MCDONALD
2005-12-22 10:02:12 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
JanRwl@A...
2005-12-22 10:06:27 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Dhiren Shah
2005-12-22 10:14:31 UTC
RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
cnc002@a...
2005-12-22 10:36:40 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Alan Marconett
2005-12-22 10:37:35 UTC
RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Codesuidae
2005-12-22 10:46:24 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Ken Strauss
2005-12-22 11:02:22 UTC
RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Jon Elson
2005-12-22 18:50:17 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Jeffrey Goldberg
2005-12-22 19:49:50 UTC
RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Jon Elson
2005-12-22 21:43:10 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
BobWarfield
2005-12-22 23:40:04 UTC
Re: CNC Without a PC for Amish
Peter Reilley
2005-12-23 04:51:03 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Richard L. Wurdack
2005-12-23 05:10:21 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Alan Marconett
2005-12-23 09:08:08 UTC
RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Jon Elson
2005-12-23 09:51:02 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Peter Reilley
2005-12-23 12:37:19 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Peter Reilley
2005-12-23 12:43:34 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Raymond Heckert
2005-12-23 17:08:37 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Raymond Heckert
2005-12-23 17:14:50 UTC
Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish
Jim Peck
2005-12-24 06:47:18 UTC
Amish CNC Operators