CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish

on 2005-12-23 09:08:08 UTC
HI Pete,

I'll bet they had some great steam engines!

Alan KM6VV
> I took a tour of Amish country and this is the way that it was
> explained to me;
>
> The Amish object to a connection to the outside world. Thus,
> no electricity or phone. Those are connected by a wire to the
> "English" (their term for outsiders). They cannot use generators
> because they require gas which comes from the outside. This
> describes their home life.
> <snip>
> Pete.

Discussion Thread

ronbiblio 2005-12-22 09:48:10 UTC CNC Without a PC for Amish Jeff Goldberg 2005-12-22 09:59:07 UTC RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish STAN MCDONALD 2005-12-22 10:02:12 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish JanRwl@A... 2005-12-22 10:06:27 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Dhiren Shah 2005-12-22 10:14:31 UTC RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish cnc002@a... 2005-12-22 10:36:40 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Alan Marconett 2005-12-22 10:37:35 UTC RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Codesuidae 2005-12-22 10:46:24 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Ken Strauss 2005-12-22 11:02:22 UTC RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Jon Elson 2005-12-22 18:50:17 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Jeffrey Goldberg 2005-12-22 19:49:50 UTC RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Jon Elson 2005-12-22 21:43:10 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish BobWarfield 2005-12-22 23:40:04 UTC Re: CNC Without a PC for Amish Peter Reilley 2005-12-23 04:51:03 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Richard L. Wurdack 2005-12-23 05:10:21 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Alan Marconett 2005-12-23 09:08:08 UTC RE: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Jon Elson 2005-12-23 09:51:02 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Peter Reilley 2005-12-23 12:37:19 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Peter Reilley 2005-12-23 12:43:34 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Raymond Heckert 2005-12-23 17:08:37 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Raymond Heckert 2005-12-23 17:14:50 UTC Re: [CAD_CAM_EDM_DRO] CNC Without a PC for Amish Jim Peck 2005-12-24 06:47:18 UTC Amish CNC Operators