CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Imbedded computers

Posted by Wayne Weedon
on 2005-12-24 09:06:02 UTC
wanliker@... wrote:

>
>
>
>I think the Mini-ITX with built in Ethernet will be joy to use with the
>Gecko G-Rex and Mach IV.
>
>
>What about Mach3? A lot of life in that system yet.
>
>

Yes sure.. But Mach IV is the version for the G-REX. As this system
will reduce the overhead on the CPU a slower motherboard could be
used. Most of the <1Ghz Mini-ITX boards are fanless...

Wayne....

--
---------------------------------------------------------------------------
Wayne M Weedon Email: wayne@...
Fdos Design Poole UK
Tel +44-1202-677025 Fax +44-1202-770515 Mobile: 07774 439915

Specialists in small batch & Production Mechanical/Electrical Engineering
---------------------------------------------------------------------------

Discussion Thread

wanliker@a... 2005-12-23 20:03:06 UTC Imbedded computers Jon Elson 2005-12-23 20:49:44 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Tyson S. 2005-12-23 20:56:28 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers skullworks 2005-12-23 23:45:20 UTC Re: Imbedded computers juan gelt 2005-12-24 00:09:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Imbedded computers wanliker@a... 2005-12-24 07:52:59 UTC Imbedded computers Tyson S. 2005-12-24 08:15:32 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Wayne Weedon 2005-12-24 08:47:46 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers wanliker@a... 2005-12-24 08:54:33 UTC Imbedded computers R Rogers 2005-12-24 08:57:15 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Wayne Weedon 2005-12-24 09:04:57 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Wayne Weedon 2005-12-24 09:06:02 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Wayne Weedon 2005-12-24 09:06:11 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers D Cranston 2005-12-24 09:09:24 UTC RE: [CAD_CAM_EDM_DRO] Imbedded computers caedave 2005-12-24 11:42:41 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Blue 2005-12-24 13:23:24 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers John Johnson 2005-12-25 09:52:03 UTC Re: [CAD_CAM_EDM_DRO] Imbedded[sic] computers wanliker@a... 2006-01-01 11:20:50 UTC Imbedded computers Jon Elson 2006-01-01 22:19:47 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Richard Garnish 2006-01-04 08:57:35 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers wanliker@a... 2006-01-04 10:45:59 UTC Imbedded computers Codesuidae 2006-01-04 12:53:52 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Stephen Wille Padnos 2006-01-04 14:19:04 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Codesuidae 2006-01-04 14:36:13 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Codesuidae 2006-01-04 14:55:05 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Steve Blackmore 2006-01-04 15:05:02 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Codesuidae 2006-01-04 15:16:21 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers juan gelt 2006-01-04 15:44:07 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Stephen Wille Padnos 2006-01-04 16:27:45 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Stephen Wille Padnos 2006-01-04 16:27:49 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers juan gelt 2006-01-04 17:05:57 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Codesuidae 2006-01-04 17:39:24 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Codesuidae 2006-01-04 18:14:59 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Stephen Wille Padnos 2006-01-04 18:50:14 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Codesuidae 2006-01-04 19:25:27 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Richard Garnish 2006-01-05 07:49:27 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers D Cranston 2006-01-05 08:04:58 UTC RE: [CAD_CAM_EDM_DRO] Imbedded computers Richard Garnish 2006-01-05 08:55:04 UTC RE: [CAD_CAM_EDM_DRO] Imbedded computers Codesuidae 2006-01-05 10:23:11 UTC Re: [CAD_CAM_EDM_DRO] Imbedded computers Anders Wallin 2006-01-05 13:42:48 UTC DXF Polygon Mesh to IGES Surface ? Aftiel 2006-01-05 13:58:12 UTC Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ? Brent Fucns 2006-01-05 14:01:30 UTC Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ? R Rogers 2006-01-05 14:27:01 UTC Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ? R Rogers 2006-01-05 15:23:44 UTC Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ? Jeff Thompson 2006-01-16 16:37:40 UTC Re: Imbedded computers