Re: [CAD_CAM_EDM_DRO] Imbedded computers
Posted by
Codesuidae
on 2006-01-04 14:36:13 UTC
Stephen Wille Padnos wrote:
includes isochronous mode to address excessive delays caused by the
video subsystem. This is specifically intended to address problems
caused by AGP transactions taking excessive time away from
time-sensitive applications. This mode might fix the problem for
montion control applications as well.
I'd be interested in seeing any data you have that documents problems in
pulse generation caused by the AGP subsystem.
Dave K
>The one thing that is different from most desktops is embedded video.This could be a problem with AGP specifications 1.0 and 2.0. AGP 3.0
>Not just "video on the motherboard", but "video using shared memory
>access". This can be a problem for interrupt latency, and the CPU can't
>necessarily even tell that anything bad is happening - it gets
>effectively stopped while the video subsystem is using main memory
>
>
includes isochronous mode to address excessive delays caused by the
video subsystem. This is specifically intended to address problems
caused by AGP transactions taking excessive time away from
time-sensitive applications. This mode might fix the problem for
montion control applications as well.
I'd be interested in seeing any data you have that documents problems in
pulse generation caused by the AGP subsystem.
Dave K
Discussion Thread
wanliker@a...
2005-12-23 20:03:06 UTC
Imbedded computers
Jon Elson
2005-12-23 20:49:44 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Tyson S.
2005-12-23 20:56:28 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
skullworks
2005-12-23 23:45:20 UTC
Re: Imbedded computers
juan gelt
2005-12-24 00:09:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Imbedded computers
wanliker@a...
2005-12-24 07:52:59 UTC
Imbedded computers
Tyson S.
2005-12-24 08:15:32 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 08:47:46 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
wanliker@a...
2005-12-24 08:54:33 UTC
Imbedded computers
R Rogers
2005-12-24 08:57:15 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 09:04:57 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 09:06:02 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 09:06:11 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
D Cranston
2005-12-24 09:09:24 UTC
RE: [CAD_CAM_EDM_DRO] Imbedded computers
caedave
2005-12-24 11:42:41 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Blue
2005-12-24 13:23:24 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
John Johnson
2005-12-25 09:52:03 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded[sic] computers
wanliker@a...
2006-01-01 11:20:50 UTC
Imbedded computers
Jon Elson
2006-01-01 22:19:47 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Richard Garnish
2006-01-04 08:57:35 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
wanliker@a...
2006-01-04 10:45:59 UTC
Imbedded computers
Codesuidae
2006-01-04 12:53:52 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 14:19:04 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 14:36:13 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 14:55:05 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Steve Blackmore
2006-01-04 15:05:02 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 15:16:21 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
juan gelt
2006-01-04 15:44:07 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 16:27:45 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 16:27:49 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
juan gelt
2006-01-04 17:05:57 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 17:39:24 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 18:14:59 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 18:50:14 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 19:25:27 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Richard Garnish
2006-01-05 07:49:27 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
D Cranston
2006-01-05 08:04:58 UTC
RE: [CAD_CAM_EDM_DRO] Imbedded computers
Richard Garnish
2006-01-05 08:55:04 UTC
RE: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-05 10:23:11 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Anders Wallin
2006-01-05 13:42:48 UTC
DXF Polygon Mesh to IGES Surface ?
Aftiel
2006-01-05 13:58:12 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
Brent Fucns
2006-01-05 14:01:30 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
R Rogers
2006-01-05 14:27:01 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
R Rogers
2006-01-05 15:23:44 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
Jeff Thompson
2006-01-16 16:37:40 UTC
Re: Imbedded computers