RE: [CAD_CAM_EDM_DRO] Imbedded computers
Posted by
Richard Garnish
on 2006-01-05 08:55:04 UTC
Not Mach, no. I tried Master5 on Win98 and it seemed to work well. For
now I've settled on EMC, and although it doesn't have a machine to drive
yet it seems to be entirely happy. I can understand that the
requirements of Mach (or rather, the requirements of the OS it needs to
run) might be a bit much for it, although I would still have expected it
work work. My other MiniITX board is set up as a DVR running MythTV and
does a great job.
Richard
now I've settled on EMC, and although it doesn't have a machine to drive
yet it seems to be entirely happy. I can understand that the
requirements of Mach (or rather, the requirements of the OS it needs to
run) might be a bit much for it, although I would still have expected it
work work. My other MiniITX board is set up as a DVR running MythTV and
does a great job.
Richard
On Thu, 2006-01-05 at 16:01, D Cranston wrote:
> Richard
> Have you been able to run Machn on a Mini-ITX board? I tried a
> couple of years ago, but Mach2 locked up the PC totally. This was a 1ghz
> with 1g memory using the VIA chipset running XP Pro. The mother board works
> fine for everything else (I'm using it now for a office PC). There was a
> second hand report on the Mach list that some one was able to do this, but I
> haven't been able to find out who it was or what they did. Note; putting a
> display board and disabling the on-board video made no difference.
>
> Dennis In Houston
>
>
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Richard Garnish
> Sent: Thursday, January 05, 2006 9:43 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: Re: [CAD_CAM_EDM_DRO] Imbedded computers
>
> It runs about anything a normal PC will run. Windows/Mach or Linux/EMC,
> take your pick :)
>
> Richard
>
> On Wed, 2006-01-04 at 18:45, wanliker@... wrote:
> > In a message dated 1/4/2006 9:58:35 A.M. Mountain Standard Time,
> > rdg@... writes:
> >
> > MiniITX boards are an obvious choice for CNC control, I'd be very
> > surprised if it hasn't been done already (I'm already planning my next
> > mill project to run from one.)
> >
> >
> > Who is going to be the first to show us an operating system using the
> > MiniITX, and tell the rest of us how to do it?
> > bill
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
Discussion Thread
wanliker@a...
2005-12-23 20:03:06 UTC
Imbedded computers
Jon Elson
2005-12-23 20:49:44 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Tyson S.
2005-12-23 20:56:28 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
skullworks
2005-12-23 23:45:20 UTC
Re: Imbedded computers
juan gelt
2005-12-24 00:09:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Imbedded computers
wanliker@a...
2005-12-24 07:52:59 UTC
Imbedded computers
Tyson S.
2005-12-24 08:15:32 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 08:47:46 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
wanliker@a...
2005-12-24 08:54:33 UTC
Imbedded computers
R Rogers
2005-12-24 08:57:15 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 09:04:57 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 09:06:02 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 09:06:11 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
D Cranston
2005-12-24 09:09:24 UTC
RE: [CAD_CAM_EDM_DRO] Imbedded computers
caedave
2005-12-24 11:42:41 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Blue
2005-12-24 13:23:24 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
John Johnson
2005-12-25 09:52:03 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded[sic] computers
wanliker@a...
2006-01-01 11:20:50 UTC
Imbedded computers
Jon Elson
2006-01-01 22:19:47 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Richard Garnish
2006-01-04 08:57:35 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
wanliker@a...
2006-01-04 10:45:59 UTC
Imbedded computers
Codesuidae
2006-01-04 12:53:52 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 14:19:04 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 14:36:13 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 14:55:05 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Steve Blackmore
2006-01-04 15:05:02 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 15:16:21 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
juan gelt
2006-01-04 15:44:07 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 16:27:45 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 16:27:49 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
juan gelt
2006-01-04 17:05:57 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 17:39:24 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 18:14:59 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 18:50:14 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 19:25:27 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Richard Garnish
2006-01-05 07:49:27 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
D Cranston
2006-01-05 08:04:58 UTC
RE: [CAD_CAM_EDM_DRO] Imbedded computers
Richard Garnish
2006-01-05 08:55:04 UTC
RE: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-05 10:23:11 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Anders Wallin
2006-01-05 13:42:48 UTC
DXF Polygon Mesh to IGES Surface ?
Aftiel
2006-01-05 13:58:12 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
Brent Fucns
2006-01-05 14:01:30 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
R Rogers
2006-01-05 14:27:01 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
R Rogers
2006-01-05 15:23:44 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
Jeff Thompson
2006-01-16 16:37:40 UTC
Re: Imbedded computers