Re: [CAD_CAM_EDM_DRO] Imbedded computers
Posted by
Blue
on 2005-12-24 13:23:24 UTC
Hi Bill,
The one I looked at had printer, PCI, USB and serial ports. It used an 800 mhz processor and ran XP. It also had network, sound and video outs. All for £55 and it ran off a normal puter power supply.
You would need to add a monitor, keyboard, mouse and harddrive.
http://linitx.com/product_info.php?products_id=21
Regards,
Terry
Do any of these have printer ports so they can directly drive our
controllers, or are we in trouble there?
From my understanding USB is not up to par for that purpose.\
bill
[Non-text portions of this message have been removed]
The one I looked at had printer, PCI, USB and serial ports. It used an 800 mhz processor and ran XP. It also had network, sound and video outs. All for £55 and it ran off a normal puter power supply.
You would need to add a monitor, keyboard, mouse and harddrive.
http://linitx.com/product_info.php?products_id=21
Regards,
Terry
Do any of these have printer ports so they can directly drive our
controllers, or are we in trouble there?
From my understanding USB is not up to par for that purpose.\
bill
[Non-text portions of this message have been removed]
Discussion Thread
wanliker@a...
2005-12-23 20:03:06 UTC
Imbedded computers
Jon Elson
2005-12-23 20:49:44 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Tyson S.
2005-12-23 20:56:28 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
skullworks
2005-12-23 23:45:20 UTC
Re: Imbedded computers
juan gelt
2005-12-24 00:09:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Imbedded computers
wanliker@a...
2005-12-24 07:52:59 UTC
Imbedded computers
Tyson S.
2005-12-24 08:15:32 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 08:47:46 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
wanliker@a...
2005-12-24 08:54:33 UTC
Imbedded computers
R Rogers
2005-12-24 08:57:15 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 09:04:57 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 09:06:02 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Wayne Weedon
2005-12-24 09:06:11 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
D Cranston
2005-12-24 09:09:24 UTC
RE: [CAD_CAM_EDM_DRO] Imbedded computers
caedave
2005-12-24 11:42:41 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Blue
2005-12-24 13:23:24 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
John Johnson
2005-12-25 09:52:03 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded[sic] computers
wanliker@a...
2006-01-01 11:20:50 UTC
Imbedded computers
Jon Elson
2006-01-01 22:19:47 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Richard Garnish
2006-01-04 08:57:35 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
wanliker@a...
2006-01-04 10:45:59 UTC
Imbedded computers
Codesuidae
2006-01-04 12:53:52 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 14:19:04 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 14:36:13 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 14:55:05 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Steve Blackmore
2006-01-04 15:05:02 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 15:16:21 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
juan gelt
2006-01-04 15:44:07 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 16:27:45 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 16:27:49 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
juan gelt
2006-01-04 17:05:57 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 17:39:24 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 18:14:59 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Stephen Wille Padnos
2006-01-04 18:50:14 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-04 19:25:27 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Richard Garnish
2006-01-05 07:49:27 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
D Cranston
2006-01-05 08:04:58 UTC
RE: [CAD_CAM_EDM_DRO] Imbedded computers
Richard Garnish
2006-01-05 08:55:04 UTC
RE: [CAD_CAM_EDM_DRO] Imbedded computers
Codesuidae
2006-01-05 10:23:11 UTC
Re: [CAD_CAM_EDM_DRO] Imbedded computers
Anders Wallin
2006-01-05 13:42:48 UTC
DXF Polygon Mesh to IGES Surface ?
Aftiel
2006-01-05 13:58:12 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
Brent Fucns
2006-01-05 14:01:30 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
R Rogers
2006-01-05 14:27:01 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
R Rogers
2006-01-05 15:23:44 UTC
Re: [CAD_CAM_EDM_DRO] DXF Polygon Mesh to IGES Surface ?
Jeff Thompson
2006-01-16 16:37:40 UTC
Re: Imbedded computers