Re: [CAD_CAM_EDM_DRO] Re: What is prefered connector for steppers to control box?

Hi, as an electrical&electronics inspector for a major printing machine
company for 7 years, Sven you are correct, no solder! cul brian f.

----- Original Message -----
From: "Familia Peter Arce & TAD" <peteryco@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, December 27, 2005 8:18 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: What is prefered connector for steppers
to control box?


> After a lot of trouble with broken tined wire tips, I went to crimp
> terminals: End of story, no more wire breakage and I pass through a lot
> of factories.
> Sven Peter
>
> ----- Mensaje Original -----
> De: CalBoy101 <pt@...>
> Fecha: Martes, Diciembre 27, 2005 12:49 pm
> Asunto: [CAD_CAM_EDM_DRO] Re: What is prefered connector for steppers
> to control box?
>
> > Why use connectors at all, you're just adding additional expense
> > and
> > another potential failure point. I wired my steppers directly to
> > the
> > terminal strips on my Gecko's in the control box. I've only had to
> > take them off once so far, which is pretty easy to do, so external
> > connectors wouldn't have bought me much so far, and I don't expect
> > to
> > be removing them very often.
> >
> > Actually the terminal strips on Gecko drives are actually
> > connector
> > themselves, they pop off from a row of connector pins on the drive.
> >
> > The wires are strain relieved and grommeted where needed as they
> > enter
> > the box. I also use a soldering iron to "tin" any wire I'm using
> > with
> > a terminal strip, it makes the connection more solid and reliable.
> >
> > Paul T.
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@..., timg@...
> > Moderator: pentam@... indigo_red@...
> > davemucha@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> > reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to
> > be a sister site to the CCED group, as many of the same members
> > are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>