RE: [CAD_CAM_EDM_DRO] What is prefered connector for steppers to control box?

> >
> I like the AMP CPC connectors. These are bayonet locking plastic
> connectors, with crimped gold pins. The only downside is the crimping
> tool is VERY expensive (about $90). There may be a cheaper crimper
> that will work, such as a Molex.
> Jon

The Molex tool I use for the CPC group of connectors is Crimp Service Tool #
63811-1000 and was about $50. Expensive but does a really nice job.

John Dammeyer