RE: [CAD_CAM_EDM_DRO] Re: What is prefered connector for steppers to control box?

Ahh. I am familiar with the Speakon connectors.

But they are certainly not the only 4-pole connector that Neutrik makes.
Hence my confusion. Thanks for clarifying this point.


Andy Wander
Verrex Corporation

-----Original Message-----
From: CAD_CAM_EDM_DRO@yahoogroups.com
[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Erie Patsellis
Sent: Saturday, December 31, 2005 11:43 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: What is prefered connector for
steppers to control box?

actually andy, they're a dead front connector, I use them for nearly
every servo and stepper retro I do, check out www.neutrik.com (I think)
and look at the speakon connectors.

erie

Andy Wander wrote:

>I would bet those are the "XLR" type that I mentioned a while back.
>
>
>Andy Wander
>Verrex Corporation
>
>-----Original Message-----
>From: CAD_CAM_EDM_DRO@yahoogroups.com
>[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Erie Patsellis
>Sent: Tuesday, December 27, 2005 5:41 PM
>To: CAD_CAM_EDM_DRO@yahoogroups.com
>Subject: Re: [CAD_CAM_EDM_DRO] Re: What is prefered connector for
>steppers to control box?
>
>another option is 4 pole neutrik connectors (Parts express carries
>them)
>
>erie
>
>rllalonde2000 wrote:
>
>
>
>>--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jymmm <jymmm@y...> wrote:
>>
>>
>>
>>
>>>Thanks guys, That's a wealth of information and good options. I'll
>>>
>>>
>>>
>>>
>>investigate the prices and make a choice.
>>
>>Merry Christmas everyone,
>>
>>Rick L.
>>
>>
>>
>>
>>
>>>Hi Rick,
>>>
>>>I like these type of connectors mainly for the locking ring, other
>>>places offer higher pin count if needed and usually cheaper.
>>>
>>>Also able to ground the cable shielding too, due the metal
>>>
>>>
>>>
>>>
>>construction.
>>
>>
>>
>>
>>>I mention Radio Shack, because at 4pm on a sunday afternoon you
>>>
>>>
>>>
>>>
>>can still get
>>
>>
>>
>>
>>>a replacement jack if ever needed.
>>>
>>>4-Pin Panel Mount Microphone Audio Jack
>>>http://www.radioshack.com/product/index.jsp?productId=2103996
>>>
>>>4-Pin Female CB & HAM Radio Mic Plug
>>>http://www.radioshack.com/product/index.jsp?productId=2103255
>>>
>>>Jim...
>>>
>>>
>>>
>>>
>>>
>>>> Date: Sat, 24 Dec 2005 05:33:48 -0000
>>>> From: "rllalonde2000" <alalonde@s...>
>>>>Subject: What is prefered connector for steppers to control box?
>>>>
>>>>Hi Guys, Any advice as to what type of connectors to mount to
>>>>
>>>>
>>>>
>>>>
>>my "from
>>
>>
>>
>>
>>>>scratch" control box for the steppers? They're nema 34's. Any
>>>>
>>>>
>>>>
>>>>
>>good
>>
>>
>>
>>
>>>>sources would be appreciated as well.
>>>>
>>>>Thanks in advance,
>>>>
>>>>Rick L.
>>>>
>>>>
>>>>
>>>>
>>>
>>>__________________________________________
>>>Yahoo! DSL - Something to write home about.
>>>Just $16.99/mo. or less.
>>>dsl.yahoo.com
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>Addresses:
>>FAQ: http://www.ktmarketing.com/faq.html
>>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>
>>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,

>>timg@...
>>Moderator: pentam@... indigo_red@... davemucha@...
>>
>>
>
>
>
>>[Moderators] URL to this group:
>>http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>
>>OFF Topic POSTS: General Machining
>>If you wish to post on unlimited OT subjects goto:
>>
>>
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
>it if you have trouble.
>
>
>>http://www.metalworking.com/news_servers.html
>>
>>http://groups.yahoo.com/group/jobshophomeshop I consider this to be

a

>>
>>
>sister site to the CCED group, as many of the same members are there,
>for OT subjects, that are not allowed on the CCED list.
>
>
>>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>>
>>
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
>
>>bill
>>List Mom
>>List Owner
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>--
>your source for cnc software, hardware and retrofits
>www.shelbyvilledesign.com
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... davemucha@...
>[Moderators] URL to this group:
>http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
>it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there,
>for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING

THEM.

>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>This communication including any attachments, are intended for the
>exclusive use of the addressee(s) and contains confidential or
>copyrighted materials. Duplication, distribution or reproduction is
>strictly prohibited by law without written permission of Verrex
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... davemucha@...

>[Moderators] URL to this group:
>http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.

>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a

sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING

THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>

--
your source for cnc software, hardware and retrofits
www.shelbyvilledesign.com



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links








This communication including any attachments, are intended
for the exclusive use of the addressee(s) and contains
confidential or copyrighted materials. Duplication,
distribution or reproduction is strictly prohibited by law
without written permission of Verrex