Re: [CAD_CAM_EDM_DRO] Re: What is prefered connector for steppers to control box?

actually andy, they're a dead front connector, I use them for nearly
every servo and stepper retro I do, check out www.neutrik.com (I think)
and look at the speakon connectors.

erie

Andy Wander wrote:

>I would bet those are the "XLR" type that I mentioned a while back.
>
>
>Andy Wander
>Verrex Corporation
>
>-----Original Message-----
>From: CAD_CAM_EDM_DRO@yahoogroups.com
>[mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Erie Patsellis
>Sent: Tuesday, December 27, 2005 5:41 PM
>To: CAD_CAM_EDM_DRO@yahoogroups.com
>Subject: Re: [CAD_CAM_EDM_DRO] Re: What is prefered connector for
>steppers to control box?
>
>another option is 4 pole neutrik connectors (Parts express carries them)
>
>erie
>
>rllalonde2000 wrote:
>
>
>
>>--- In CAD_CAM_EDM_DRO@yahoogroups.com, Jymmm <jymmm@y...> wrote:
>>
>>
>>
>>
>>>Thanks guys, That's a wealth of information and good options. I'll
>>>
>>>
>>>
>>>
>>investigate the prices and make a choice.
>>
>>Merry Christmas everyone,
>>
>>Rick L.
>>
>>
>>
>>
>>
>>>Hi Rick,
>>>
>>>I like these type of connectors mainly for the locking ring, other
>>>places offer higher pin count if needed and usually cheaper.
>>>
>>>Also able to ground the cable shielding too, due the metal
>>>
>>>
>>>
>>>
>>construction.
>>
>>
>>
>>
>>>I mention Radio Shack, because at 4pm on a sunday afternoon you
>>>
>>>
>>>
>>>
>>can still get
>>
>>
>>
>>
>>>a replacement jack if ever needed.
>>>
>>>4-Pin Panel Mount Microphone Audio Jack
>>>http://www.radioshack.com/product/index.jsp?productId=2103996
>>>
>>>4-Pin Female CB & HAM Radio Mic Plug
>>>http://www.radioshack.com/product/index.jsp?productId=2103255
>>>
>>>Jim...
>>>
>>>
>>>
>>>
>>>
>>>> Date: Sat, 24 Dec 2005 05:33:48 -0000
>>>> From: "rllalonde2000" <alalonde@s...>
>>>>Subject: What is prefered connector for steppers to control box?
>>>>
>>>>Hi Guys, Any advice as to what type of connectors to mount to
>>>>
>>>>
>>>>
>>>>
>>my "from
>>
>>
>>
>>
>>>>scratch" control box for the steppers? They're nema 34's. Any
>>>>
>>>>
>>>>
>>>>
>>good
>>
>>
>>
>>
>>>>sources would be appreciated as well.
>>>>
>>>>Thanks in advance,
>>>>
>>>>Rick L.
>>>>
>>>>
>>>>
>>>>
>>>
>>>__________________________________________
>>>Yahoo! DSL - Something to write home about.
>>>Just $16.99/mo. or less.
>>>dsl.yahoo.com
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>Addresses:
>>FAQ: http://www.ktmarketing.com/faq.html
>>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>>
>>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>>timg@...
>>Moderator: pentam@... indigo_red@... davemucha@...
>>
>>
>
>
>
>>[Moderators] URL to this group:
>>http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>>
>>OFF Topic POSTS: General Machining
>>If you wish to post on unlimited OT subjects goto:
>>
>>
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
>if you have trouble.
>
>
>>http://www.metalworking.com/news_servers.html
>>
>>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>>
>>
>sister site to the CCED group, as many of the same members are there,
>for OT subjects, that are not allowed on the CCED list.
>
>
>>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>>
>>
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
>
>>bill
>>List Mom
>>List Owner
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>--
>your source for cnc software, hardware and retrofits
>www.shelbyvilledesign.com
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@... davemucha@...
>[Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
>aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
>if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there,
>for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
>DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>This communication including any attachments, are intended
>for the exclusive use of the addressee(s) and contains
>confidential or copyrighted materials. Duplication,
>distribution or reproduction is strictly prohibited by law
>without written permission of Verrex
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>

--
your source for cnc software, hardware and retrofits
www.shelbyvilledesign.com