Re: [CAD_CAM_EDM_DRO] Re: Another router video..
Posted by
R Rogers
on 2006-06-02 07:37:25 UTC
The bit chattered and walked the hole on the way out. Only holding on with two sided tape. Yes, I jumped..lol Thinking about the block stuck to the bit and spinning at 25,000 rpm. Not a good thought. Chinese throwing star.
Wayne Weedon <wayne@...> wrote:
Graham Stabler wrote:
the drill has left the hole. That hole does not look round like the
others either.
--
---------------------------------------------------------------------------
Wayne M Weedon Email: wayne@...
Fdos Design Poole UK
Tel +44-1202-677025 Fax +44-1202-770515 Mobile: 07774 439915
Specialists in small batch & Production Mechanical/Electrical Engineering
---------------------------------------------------------------------------
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
[Non-text portions of this message have been removed]
Wayne Weedon <wayne@...> wrote:
Graham Stabler wrote:
>Play it frame by frame and there seems to be an unwanted x move before
>There is also a strank "twok" noise at the end of the 4th hole when
>its drilled! ?? :)
>
>
the drill has left the hole. That hole does not look round like the
others either.
--
---------------------------------------------------------------------------
Wayne M Weedon Email: wayne@...
Fdos Design Poole UK
Tel +44-1202-677025 Fax +44-1202-770515 Mobile: 07774 439915
Specialists in small batch & Production Mechanical/Electrical Engineering
---------------------------------------------------------------------------
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner
Yahoo! Groups Links
[Non-text portions of this message have been removed]
Discussion Thread
rogersmach
2006-05-31 14:36:14 UTC
Another router video..
afogassa
2006-05-31 20:03:45 UTC
Re: Another router video..
ballendo
2006-06-01 00:12:23 UTC
Re: Another router video..
R Rogers
2006-06-01 04:30:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
ballendo
2006-06-01 05:27:01 UTC
Re: Another router video..
lcdpublishing
2006-06-01 05:56:41 UTC
Re: Another router video..
Graham Stabler
2006-06-01 06:06:46 UTC
Re: Another router video..
lcdpublishing
2006-06-01 06:23:22 UTC
Re: Another router video..
R Rogers
2006-06-01 06:39:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
Graham Stabler
2006-06-01 06:55:34 UTC
Re: Another router video..
lcdpublishing
2006-06-01 07:29:53 UTC
Re: Another router video..
Graham Stabler
2006-06-01 07:37:32 UTC
Re: Another router video..
Jeff Goldberg
2006-06-01 07:53:29 UTC
RE: [CAD_CAM_EDM_DRO] Ot: Re: Another router video..
ballendo
2006-06-01 08:02:19 UTC
Re: Another router video..
R Rogers
2006-06-01 09:27:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
ballendo
2006-06-01 10:06:26 UTC
Re: Another router video..
R Rogers
2006-06-01 10:46:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
delmar williams
2006-06-01 11:30:24 UTC
RE: [CAD_CAM_EDM_DRO] Ot: Re: Another router video..
ballendo
2006-06-01 11:36:00 UTC
Re: Another router video..
Mariss Freimanis
2006-06-01 21:41:10 UTC
Re: Another router video..
figNoggle
2006-06-01 22:04:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
Jarrett & Heidi Johnson
2006-06-01 22:51:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
Paul Kelly
2006-06-02 03:31:42 UTC
Musings on screw pitches
Tony Jeffree
2006-06-02 04:22:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
R Rogers
2006-06-02 05:23:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: New router video..
Wayne Weedon
2006-06-02 05:42:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
lcdpublishing
2006-06-02 06:20:42 UTC
Re: Another router video..
Graham Stabler
2006-06-02 06:24:46 UTC
Re: Another router video..
lcdpublishing
2006-06-02 07:03:01 UTC
Re: Another router video..
Wayne Weedon
2006-06-02 07:24:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
R Rogers
2006-06-02 07:37:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
John Dammeyer
2006-06-02 07:51:43 UTC
RE: [CAD_CAM_EDM_DRO] Musings on screw pitches
Paul Kelly
2006-06-02 08:07:34 UTC
RE: [CAD_CAM_EDM_DRO] Musings on screw pitches
Andy Wander
2006-06-02 08:26:09 UTC
RE: [CAD_CAM_EDM_DRO] Musings on screw pitches
John Dammeyer
2006-06-02 08:30:08 UTC
RE: [CAD_CAM_EDM_DRO] Musings on screw pitches
Heidi Johnson
2006-06-02 09:03:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
R Rogers
2006-06-02 09:20:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
Graham Stabler
2006-06-02 16:11:55 UTC
Re: Another router video..
Graham Stabler
2006-06-02 16:32:10 UTC
Re: Another router video..
Paul Kelly
2006-06-02 16:42:41 UTC
RE: [CAD_CAM_EDM_DRO] Musings on screw pitches
wanliker@a...
2006-06-02 17:04:45 UTC
Re: Another router video..
Paul Kelly
2006-06-02 17:10:41 UTC
RE: [CAD_CAM_EDM_DRO] Re: Another router video..
art
2006-06-02 18:01:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
turbulatordude
2006-06-02 19:02:08 UTC
Re: Another router video..
ballendo
2006-06-03 04:38:18 UTC
Re: New router video..
fortino
2006-06-03 04:39:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
ballendo
2006-06-03 04:55:12 UTC
Re: Another router video..
ballendo
2006-06-03 05:03:21 UTC
Re: Musings on screw pitches
Harko Schwartz
2006-06-03 05:07:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..
R Rogers
2006-06-03 05:34:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: New router video..
ballendo
2006-06-03 05:40:47 UTC
Re: Musings on screw pitches
ballendo
2006-06-03 06:01:59 UTC
Re: New router video..
turbulatordude
2006-06-03 06:48:45 UTC
Re: New router video..
Graham Stabler
2006-06-03 06:57:29 UTC
Re: New router video..
Graham Stabler
2006-06-03 07:02:56 UTC
Re: New router video..
Fred Smith
2006-06-04 02:14:24 UTC
Drilling toolpath optimization Re: New router video..
R Rogers
2006-06-04 07:30:25 UTC
Re: [CAD_CAM_EDM_DRO] Drilling toolpath optimization Re: New router video..
turbulatordude
2006-06-04 07:59:19 UTC
Drilling toolpath optimization Re: New router video..
Stephen Wille Padnos
2006-06-04 11:50:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Another router video..