RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Posted by
Dave Halliday
on 2008-10-23 22:18:32 UTC
Coming in late to the parade here...
It isn't that it flat out will not work, the case is that over on the MACH
forum, a lot of people have tried to use a laptop and precious few have met
with any form of reliable success.
The timing precision needed for CNC motor control is something that the
laptops designers never ever had in mind.
Best bet is to find an Intel box with at least 1GB Ram, 1.8GHz clock speed,
50+GB disk space and a stand-alone video controller card. You can run on
lesser systems but it will be an exercise in frustration. The system as
stated will run flawlessly out of the box.
PLEASE NOTE: There have been some issues with certain motherboards -- a
visit to the MACH site is in order.
Dave
It isn't that it flat out will not work, the case is that over on the MACH
forum, a lot of people have tried to use a laptop and precious few have met
with any form of reliable success.
The timing precision needed for CNC motor control is something that the
laptops designers never ever had in mind.
Best bet is to find an Intel box with at least 1GB Ram, 1.8GHz clock speed,
50+GB disk space and a stand-alone video controller card. You can run on
lesser systems but it will be an exercise in frustration. The system as
stated will run flawlessly out of the box.
PLEASE NOTE: There have been some issues with certain motherboards -- a
visit to the MACH site is in order.
Dave
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Danny Miller
> Sent: Thursday, October 23, 2008 2:13 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Mach3 & laptops
>
> I was looking to set up Mach3 & a Taig with a laptop, and saw on
> Artsoft's website that "Laptops are not supported because the power
> saving features of the chipsets disrupt the pulse stream".
>
> What's the real story here? ALL laptops?? I'm kinda having
> a hard time
> believing this. Parallel ports are usually designed to...
> well, /work/
> at transferring data as designed. It's kind hard to even see this
> statement as credible, I mean the explanation borders on the absurd,
> power management and the parallel port datastream are two different
> things. Will this actually not work?
>
> And what's a "non-integrated video card", one that's not on
> the mb like
> a laptop? Why would that matter?
>
> My laptop does have a parallel port built into it. I could
> also get a
> USB-to-parallel port cable. That would add the complexity of the
> internal bridge and all but it would use a different data
> path than the
> internal serial port.
>
> Thanks,
> Danny
>
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be a sister site to the CCED group, as many of the
> same members are there, for OT subjects, that are not allowed
> on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>
Discussion Thread
afogassa
2008-07-20 21:31:49 UTC
3d printer video
andrey@e...
2008-07-20 21:51:41 UTC
RE: [CAD_CAM_EDM_DRO] 3d printer video
Michael Fagan
2008-07-20 22:01:10 UTC
Re: [CAD_CAM_EDM_DRO] 3d printer video
afogassa
2008-07-20 22:34:24 UTC
Re: 3d printer video
Maxi Bertotto
2008-07-21 15:47:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
afogassa
2008-07-21 18:23:59 UTC
Re: 3d printer video
Jon Elson
2008-07-21 22:08:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
afogassa
2008-07-21 22:46:22 UTC
Re: 3d printer video
Yahoo
2008-07-22 07:31:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
Jon Elson
2008-07-22 09:49:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
Kim Mortensen
2008-07-22 10:30:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
Ralph Reese
2008-07-22 10:44:16 UTC
RE: [CAD_CAM_EDM_DRO] Re: 3d printer video
David G. LeVine
2008-07-22 11:53:13 UTC
Re: [CAD_CAM_EDM_DRO] [OT] 3d printer video
afogassa
2008-07-22 15:21:52 UTC
Re: 3d printer video
afogassa
2008-07-22 15:31:37 UTC
Re: 3d printer video
Wreno Wynne
2008-07-23 06:11:26 UTC
Re: [CAD_CAM_EDM_DRO] [OT] 3d printer video
NEVILLE WEBSTER
2008-07-23 07:34:53 UTC
Re: [CAD_CAM_EDM_DRO] [OT] 3d printer video
Danny Miller
2008-10-23 14:12:38 UTC
Mach3 & laptops
Andy Wander
2008-10-23 15:01:57 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
David Speck
2008-10-23 15:12:08 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-23 16:02:01 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
David Speck
2008-10-23 17:24:08 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Jon Elson
2008-10-23 18:42:43 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Andy Wander
2008-10-23 18:46:38 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Andy Wander
2008-10-23 18:49:41 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
gcode fi (hanermo)
2008-10-23 19:31:54 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-23 20:51:19 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-23 20:57:01 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
wanliker@a...
2008-10-23 21:56:48 UTC
Mach3 & laptops
Dave Halliday
2008-10-23 22:18:32 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
gcode fi (hanermo)
2008-10-23 22:54:32 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
shawn c
2008-10-23 23:24:01 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Chris Horne
2008-10-24 04:08:17 UTC
Re: Mach3 & laptops
Chuck Merja
2008-10-24 04:18:24 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Chuck Merja
2008-10-24 04:32:09 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
shawn c
2008-10-24 07:30:38 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-24 12:10:24 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-24 12:32:28 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Keith Bucklitch
2008-10-24 13:55:25 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-25 11:46:46 UTC
[CAD_CAM_EDM_DRO] Machining width
R Rogers
2008-10-25 13:44:23 UTC
Re: [CAD_CAM_EDM_DRO] Machining width
Danny Miller
2008-10-25 16:42:40 UTC
Re: [CAD_CAM_EDM_DRO] Machining curved strip for a thickness
gcode fi (hanermo)
2008-10-26 00:28:05 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Lester Caine
2008-10-26 01:28:41 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Yahoo
2008-10-26 11:09:03 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-26 11:10:46 UTC
[CAD_CAM_EDM_DRO] Hotwire CNC on mill
Michael Fagan
2008-10-26 11:29:36 UTC
Re: [CAD_CAM_EDM_DRO] Hotwire CNC on mill
luv2bsailin
2008-10-26 13:19:15 UTC
Re: Mach3 & laptops
Graham Stabler
2008-10-26 16:02:37 UTC
Re: Hotwire CNC on mill
George Williamson
2008-10-26 19:19:01 UTC
Re: Hotwire CNC on mill
Michael Fagan
2008-10-26 22:36:41 UTC
Re: [CAD_CAM_EDM_DRO] Hotwire CNC on mill
dandumit
2008-10-27 02:34:37 UTC
Re: Mach3 & laptops
gcode fi (hanermo)
2008-10-27 05:41:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mach3 & laptops
Danny Miller
2008-10-28 18:08:29 UTC
[CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Michael Fagan
2008-10-28 18:12:05 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Danny Miller
2008-10-28 20:09:04 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Stephen Wille Padnos
2008-10-28 20:25:56 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Danny Miller
2008-10-29 02:39:47 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Jon Elson
2008-10-29 10:05:19 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Lester Caine
2008-10-29 11:46:28 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"