Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Posted by
Lester Caine
on 2008-10-29 11:46:28 UTC
Danny Miller wrote:
about having enough 'cycles' to do everything that is needed. The faster the
processor the more it will get done, but the memory tends to run on a
different clock anyway and the faster memory chips help as well.
--
Lester Caine - G8HFL
-----------------------------
Contact - http://lsces.co.uk/lsces/wiki/?page=contact
L.S.Caine Electronic Services - http://lsces.co.uk
EnquirySolve - http://enquirysolve.com/
Model Engineers Digital Workshop - http://medw.co.uk//
Firebird - http://www.firebirdsql.org/index.php
> OK, I got this worked out, thanks.The ITX C7 boards work fine - and they have integrated graphics. It's all
>
> I found I couldn't get my old motherboard to boot, but the video card it
> came with works fine inside this "new" system instead of its integrated
> video. And I found my old memory and processor were superior to what
> was in this thing so hey I think we're good.
>
> Unless someone has dire warnings about using the AGP video card on a
> board with (disabled) integrated video, consider the question closed.
about having enough 'cycles' to do everything that is needed. The faster the
processor the more it will get done, but the memory tends to run on a
different clock anyway and the faster memory chips help as well.
--
Lester Caine - G8HFL
-----------------------------
Contact - http://lsces.co.uk/lsces/wiki/?page=contact
L.S.Caine Electronic Services - http://lsces.co.uk
EnquirySolve - http://enquirysolve.com/
Model Engineers Digital Workshop - http://medw.co.uk//
Firebird - http://www.firebirdsql.org/index.php
Discussion Thread
afogassa
2008-07-20 21:31:49 UTC
3d printer video
andrey@e...
2008-07-20 21:51:41 UTC
RE: [CAD_CAM_EDM_DRO] 3d printer video
Michael Fagan
2008-07-20 22:01:10 UTC
Re: [CAD_CAM_EDM_DRO] 3d printer video
afogassa
2008-07-20 22:34:24 UTC
Re: 3d printer video
Maxi Bertotto
2008-07-21 15:47:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
afogassa
2008-07-21 18:23:59 UTC
Re: 3d printer video
Jon Elson
2008-07-21 22:08:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
afogassa
2008-07-21 22:46:22 UTC
Re: 3d printer video
Yahoo
2008-07-22 07:31:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
Jon Elson
2008-07-22 09:49:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
Kim Mortensen
2008-07-22 10:30:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
Ralph Reese
2008-07-22 10:44:16 UTC
RE: [CAD_CAM_EDM_DRO] Re: 3d printer video
David G. LeVine
2008-07-22 11:53:13 UTC
Re: [CAD_CAM_EDM_DRO] [OT] 3d printer video
afogassa
2008-07-22 15:21:52 UTC
Re: 3d printer video
afogassa
2008-07-22 15:31:37 UTC
Re: 3d printer video
Wreno Wynne
2008-07-23 06:11:26 UTC
Re: [CAD_CAM_EDM_DRO] [OT] 3d printer video
NEVILLE WEBSTER
2008-07-23 07:34:53 UTC
Re: [CAD_CAM_EDM_DRO] [OT] 3d printer video
Danny Miller
2008-10-23 14:12:38 UTC
Mach3 & laptops
Andy Wander
2008-10-23 15:01:57 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
David Speck
2008-10-23 15:12:08 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-23 16:02:01 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
David Speck
2008-10-23 17:24:08 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Jon Elson
2008-10-23 18:42:43 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Andy Wander
2008-10-23 18:46:38 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Andy Wander
2008-10-23 18:49:41 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
gcode fi (hanermo)
2008-10-23 19:31:54 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-23 20:51:19 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-23 20:57:01 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
wanliker@a...
2008-10-23 21:56:48 UTC
Mach3 & laptops
Dave Halliday
2008-10-23 22:18:32 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
gcode fi (hanermo)
2008-10-23 22:54:32 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
shawn c
2008-10-23 23:24:01 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Chris Horne
2008-10-24 04:08:17 UTC
Re: Mach3 & laptops
Chuck Merja
2008-10-24 04:18:24 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Chuck Merja
2008-10-24 04:32:09 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
shawn c
2008-10-24 07:30:38 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-24 12:10:24 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-24 12:32:28 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Keith Bucklitch
2008-10-24 13:55:25 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-25 11:46:46 UTC
[CAD_CAM_EDM_DRO] Machining width
R Rogers
2008-10-25 13:44:23 UTC
Re: [CAD_CAM_EDM_DRO] Machining width
Danny Miller
2008-10-25 16:42:40 UTC
Re: [CAD_CAM_EDM_DRO] Machining curved strip for a thickness
gcode fi (hanermo)
2008-10-26 00:28:05 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Lester Caine
2008-10-26 01:28:41 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Yahoo
2008-10-26 11:09:03 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-26 11:10:46 UTC
[CAD_CAM_EDM_DRO] Hotwire CNC on mill
Michael Fagan
2008-10-26 11:29:36 UTC
Re: [CAD_CAM_EDM_DRO] Hotwire CNC on mill
luv2bsailin
2008-10-26 13:19:15 UTC
Re: Mach3 & laptops
Graham Stabler
2008-10-26 16:02:37 UTC
Re: Hotwire CNC on mill
George Williamson
2008-10-26 19:19:01 UTC
Re: Hotwire CNC on mill
Michael Fagan
2008-10-26 22:36:41 UTC
Re: [CAD_CAM_EDM_DRO] Hotwire CNC on mill
dandumit
2008-10-27 02:34:37 UTC
Re: Mach3 & laptops
gcode fi (hanermo)
2008-10-27 05:41:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mach3 & laptops
Danny Miller
2008-10-28 18:08:29 UTC
[CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Michael Fagan
2008-10-28 18:12:05 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Danny Miller
2008-10-28 20:09:04 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Stephen Wille Padnos
2008-10-28 20:25:56 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Danny Miller
2008-10-29 02:39:47 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Jon Elson
2008-10-29 10:05:19 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Lester Caine
2008-10-29 11:46:28 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"