Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Posted by
Michael Fagan
on 2008-10-28 18:12:05 UTC
For less than 50 bucks, you can buy a brand new bottom of the line
video card or you can scrounge an old one, both of which plug into the
motherboard. Like many of the other issues, its not that you need the
discrete graphics, but that the integrated graphics are one more thing
that can interrupt the stability of the motion control.
video card or you can scrounge an old one, both of which plug into the
motherboard. Like many of the other issues, its not that you need the
discrete graphics, but that the integrated graphics are one more thing
that can interrupt the stability of the motion control.
On Tue, Oct 28, 2008 at 9:07 PM, Danny Miller <dannym@...> wrote:
> OK, thanks for answering my questions on the laptop. I think it's best
> to just put together a PC out of the parts I have lying around (and
> picked up off the curb).
>
> What I've got here has a AMD Geode 1700 on a 741GX-M2 motherboard. This
> has integrated video on it. Artsoft mentions NOT having a
> "non-integrated video card" there. So is that not going to work, or is
> there a way around it, or what?
>
> Danny
>
>
Discussion Thread
afogassa
2008-07-20 21:31:49 UTC
3d printer video
andrey@e...
2008-07-20 21:51:41 UTC
RE: [CAD_CAM_EDM_DRO] 3d printer video
Michael Fagan
2008-07-20 22:01:10 UTC
Re: [CAD_CAM_EDM_DRO] 3d printer video
afogassa
2008-07-20 22:34:24 UTC
Re: 3d printer video
Maxi Bertotto
2008-07-21 15:47:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
afogassa
2008-07-21 18:23:59 UTC
Re: 3d printer video
Jon Elson
2008-07-21 22:08:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
afogassa
2008-07-21 22:46:22 UTC
Re: 3d printer video
Yahoo
2008-07-22 07:31:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
Jon Elson
2008-07-22 09:49:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
Kim Mortensen
2008-07-22 10:30:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: 3d printer video
Ralph Reese
2008-07-22 10:44:16 UTC
RE: [CAD_CAM_EDM_DRO] Re: 3d printer video
David G. LeVine
2008-07-22 11:53:13 UTC
Re: [CAD_CAM_EDM_DRO] [OT] 3d printer video
afogassa
2008-07-22 15:21:52 UTC
Re: 3d printer video
afogassa
2008-07-22 15:31:37 UTC
Re: 3d printer video
Wreno Wynne
2008-07-23 06:11:26 UTC
Re: [CAD_CAM_EDM_DRO] [OT] 3d printer video
NEVILLE WEBSTER
2008-07-23 07:34:53 UTC
Re: [CAD_CAM_EDM_DRO] [OT] 3d printer video
Danny Miller
2008-10-23 14:12:38 UTC
Mach3 & laptops
Andy Wander
2008-10-23 15:01:57 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
David Speck
2008-10-23 15:12:08 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-23 16:02:01 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
David Speck
2008-10-23 17:24:08 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Jon Elson
2008-10-23 18:42:43 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Andy Wander
2008-10-23 18:46:38 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Andy Wander
2008-10-23 18:49:41 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
gcode fi (hanermo)
2008-10-23 19:31:54 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-23 20:51:19 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-23 20:57:01 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
wanliker@a...
2008-10-23 21:56:48 UTC
Mach3 & laptops
Dave Halliday
2008-10-23 22:18:32 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
gcode fi (hanermo)
2008-10-23 22:54:32 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
shawn c
2008-10-23 23:24:01 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Chris Horne
2008-10-24 04:08:17 UTC
Re: Mach3 & laptops
Chuck Merja
2008-10-24 04:18:24 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Chuck Merja
2008-10-24 04:32:09 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
shawn c
2008-10-24 07:30:38 UTC
RE: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-24 12:10:24 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-24 12:32:28 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Keith Bucklitch
2008-10-24 13:55:25 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-25 11:46:46 UTC
[CAD_CAM_EDM_DRO] Machining width
R Rogers
2008-10-25 13:44:23 UTC
Re: [CAD_CAM_EDM_DRO] Machining width
Danny Miller
2008-10-25 16:42:40 UTC
Re: [CAD_CAM_EDM_DRO] Machining curved strip for a thickness
gcode fi (hanermo)
2008-10-26 00:28:05 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Lester Caine
2008-10-26 01:28:41 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Yahoo
2008-10-26 11:09:03 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & laptops
Danny Miller
2008-10-26 11:10:46 UTC
[CAD_CAM_EDM_DRO] Hotwire CNC on mill
Michael Fagan
2008-10-26 11:29:36 UTC
Re: [CAD_CAM_EDM_DRO] Hotwire CNC on mill
luv2bsailin
2008-10-26 13:19:15 UTC
Re: Mach3 & laptops
Graham Stabler
2008-10-26 16:02:37 UTC
Re: Hotwire CNC on mill
George Williamson
2008-10-26 19:19:01 UTC
Re: Hotwire CNC on mill
Michael Fagan
2008-10-26 22:36:41 UTC
Re: [CAD_CAM_EDM_DRO] Hotwire CNC on mill
dandumit
2008-10-27 02:34:37 UTC
Re: Mach3 & laptops
gcode fi (hanermo)
2008-10-27 05:41:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mach3 & laptops
Danny Miller
2008-10-28 18:08:29 UTC
[CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Michael Fagan
2008-10-28 18:12:05 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Danny Miller
2008-10-28 20:09:04 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Stephen Wille Padnos
2008-10-28 20:25:56 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Danny Miller
2008-10-29 02:39:47 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Jon Elson
2008-10-29 10:05:19 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"
Lester Caine
2008-10-29 11:46:28 UTC
Re: [CAD_CAM_EDM_DRO] Mach3 & "integrated video"