Re: [CAD_CAM_EDM_DRO] Re: Free "zprint"

Hello Anni
I have a Z-Printet human head in wax. From 3-D Systems (USA).
If I remeber right the priter costs about 40000 $ / the wax about 120$ /kilo.
Max. printig area was 400X400X 200mm or so.
(got Your drawings and the cutters are in work, but I can only make them in
carbide-steel, breakes like glas with 0.8mm diameter - be careful. Would be
much easyer with an Angle of at least 3 Degrees cutting all over the length
of 6.5mm . Possible ?
)
Peter