re:RE: EMC
Posted by
ballendo@y...
on 2000-10-10 19:27:08 UTC
Tom writes:
I realize this was said in jest, but let's explore it for a minute:
Many machines DO do windows. Of the MS kind. Since of course, there
are those CNC's in the home window MFG. industry, but...
Most of the higher end cnc controls use dedicated motion "cards" in
one to several PC's. (see previous threads/posts)
And use a WinXX interface.
Many middle-end machines use one motion card and one PC.
And use a WinXX interface.
EMC runs RT(real-time)linux(instead of a card) and CAN be run
remotely by, you guessed it: A WinXX interface (most use something
else)
You could run a DOS controller on one box. And control it with:
A WinXX interface.
IndexerLPT(ability systems) will DO windows CNC.
Another place to look is: http://www.bestsoft.com
Pretty sure they do windows. And under(barely) the kilobuck limit.
Flashcut does windows(better than recently described,IMO)
Ah-Ha! is working on doing windows.
Microkinetics InStep library Does windows.
Personally, I like to use networked DOS/linux boxes to run machines,
and keep the windows at the design phase/station. Mice don't work
well in a shop, anyway.
Ballendo
P.S. I agree that any currently written DOS program should respect
and adhere to "windows" conventions.
>Machines can clean up after themselves but do they do windows? ;-)Tom,
I realize this was said in jest, but let's explore it for a minute:
Many machines DO do windows. Of the MS kind. Since of course, there
are those CNC's in the home window MFG. industry, but...
Most of the higher end cnc controls use dedicated motion "cards" in
one to several PC's. (see previous threads/posts)
And use a WinXX interface.
Many middle-end machines use one motion card and one PC.
And use a WinXX interface.
EMC runs RT(real-time)linux(instead of a card) and CAN be run
remotely by, you guessed it: A WinXX interface (most use something
else)
You could run a DOS controller on one box. And control it with:
A WinXX interface.
IndexerLPT(ability systems) will DO windows CNC.
Another place to look is: http://www.bestsoft.com
Pretty sure they do windows. And under(barely) the kilobuck limit.
Flashcut does windows(better than recently described,IMO)
Ah-Ha! is working on doing windows.
Microkinetics InStep library Does windows.
Personally, I like to use networked DOS/linux boxes to run machines,
and keep the windows at the design phase/station. Mice don't work
well in a shop, anyway.
Ballendo
P.S. I agree that any currently written DOS program should respect
and adhere to "windows" conventions.
Discussion Thread
Jon Elson
1999-06-06 17:00:33 UTC
EMC
Fred Proctor
1999-06-09 13:44:23 UTC
EMC
Mo
1999-06-09 19:07:53 UTC
Re: EMC
Tim Goldstein
1999-06-09 23:16:54 UTC
Re: EMC
Tim Goldstein
1999-06-15 20:18:41 UTC
Re: EMC
Dan Falck
1999-06-16 04:07:23 UTC
Re: EMC
Ian W. Wright
1999-07-29 13:03:47 UTC
Re: EMC
chda@x...
1999-10-12 08:48:51 UTC
EMC
batwings@x...
1999-10-12 00:29:11 UTC
Re: EMC
Darrell Gehlsen
1999-10-12 10:08:41 UTC
Re: EMC
Kahl Klemm
1999-11-11 10:16:23 UTC
EMC
Tim Goldstein
1999-11-21 13:05:08 UTC
RE: EMC
Karl Klemm
1999-11-21 17:55:11 UTC
RE: EMC
Tim Goldstein
1999-11-21 18:55:40 UTC
RE: EMC
Karl Klemm
1999-11-22 08:43:09 UTC
RE: EMC
hansw
1999-11-22 08:57:30 UTC
Re: EMC
Tim Goldstein
1999-11-22 09:25:51 UTC
Re: EMC
James Cullins
2000-04-19 17:24:43 UTC
EMC
Tim Goldstein
2000-04-19 19:53:13 UTC
RE: [CAD_CAM_EDM_DRO] EMC
Dan Mauch
2000-04-20 05:59:37 UTC
Re: [CAD_CAM_EDM_DRO] EMC
James Cullins
2000-04-20 06:28:07 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Tim Goldstein
2000-04-20 06:34:52 UTC
RE: [CAD_CAM_EDM_DRO]DeskNCrt, was: EMC
Chris Salter
2000-08-31 08:07:25 UTC
EMC
Anne Ogborn
2000-10-09 16:45:06 UTC
EMC
ballendo@y...
2000-10-09 20:10:22 UTC
re:EMC
Anne Ogborn
2000-10-10 10:31:18 UTC
Re: [CAD_CAM_EDM_DRO] re:EMC
Anne Ogborn
2000-10-10 10:55:06 UTC
Re: [CAD_CAM_EDM_DRO] re:EMC
Jon Elson
2000-10-10 12:02:19 UTC
Re: [CAD_CAM_EDM_DRO] re:EMC
ballendo@y...
2000-10-10 15:23:51 UTC
Re: re:EMC
Jon Elson
2000-10-10 15:59:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:EMC
ballendo@y...
2000-10-10 16:36:21 UTC
Re: Re: re:EMC
Tom Caudle
2000-10-10 17:04:19 UTC
Re: re:EMC
ballendo@y...
2000-10-10 18:02:34 UTC
RE:re: EMC
Tom Caudle
2000-10-10 18:08:41 UTC
Re: RE:re: EMC
dave engvall
2000-10-10 18:11:59 UTC
Re: [CAD_CAM_EDM_DRO] RE:re: EMC
Anne Ogborn
2000-10-10 19:15:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:EMC
Anne Ogborn
2000-10-10 19:24:24 UTC
Re: [CAD_CAM_EDM_DRO] RE:re: EMC
ballendo@y...
2000-10-10 19:27:08 UTC
re:RE: EMC
Tom Caudle
2000-10-10 19:47:22 UTC
Re: re:EMC
Anne Ogborn
2000-10-10 21:44:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:EMC
catboat15@a...
2000-10-11 09:40:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: re:EMC
ballendo@y...
2000-10-11 20:53:09 UTC
re:Re:rE:RE: EMC
barker1@m...
2000-11-03 05:11:59 UTC
EMC
Dan Falck
2000-11-03 05:29:18 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Tim Goldstein
2000-11-03 09:10:56 UTC
RE: [CAD_CAM_EDM_DRO] EMC
Jon Elson
2000-11-03 12:08:09 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Scott Hendershot
2002-03-28 10:48:22 UTC
EMC
j.guenther
2002-03-28 11:11:32 UTC
RE: [CAD_CAM_EDM_DRO] EMC
Tim Goldstein
2002-03-28 11:13:06 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Kos
2002-03-28 12:25:40 UTC
Re: EMC
Paul
2002-03-28 12:32:25 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Scott Hendershot
2002-03-28 14:14:31 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Tim Goldstein
2002-03-28 15:04:41 UTC
Re: [CAD_CAM_EDM_DRO] EMC
William Scalione
2002-03-28 21:43:04 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Jon Elson
2002-03-28 22:25:04 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Bill Vance
2002-03-28 23:14:09 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Darrell Daniels
2002-03-28 23:26:40 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Darrell Daniels
2002-03-28 23:31:42 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Gene
2002-05-06 13:10:29 UTC
EMC
Tim Goldstein
2002-05-06 14:39:30 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Ray Henry
2002-05-06 21:09:41 UTC
Re: EMC
Jon Elson
2002-05-06 22:05:51 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Gene
2002-05-07 15:18:50 UTC
EMC
Gene
2002-05-09 00:36:24 UTC
EMC
Ian W. Wright
2002-05-09 07:43:53 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Gene
2002-05-09 10:32:03 UTC
EMC
Jon Elson
2002-05-09 22:30:55 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Gene
2002-05-26 20:20:00 UTC
EMC
Jon Elson
2002-05-26 23:21:03 UTC
Re: [CAD_CAM_EDM_DRO] EMC
IMService
2002-06-06 06:14:50 UTC
Re: EMC
Gene
2002-08-18 16:07:21 UTC
EMC
John Guenther
2002-08-18 19:48:08 UTC
RE: [CAD_CAM_EDM_DRO] EMC
Jon Elson
2002-08-18 20:34:54 UTC
Re: [CAD_CAM_EDM_DRO] EMC
dakota8833
2002-08-23 05:12:23 UTC
EMC
Tom Benedict
2002-08-23 08:15:46 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Ray Henry
2002-08-23 14:50:49 UTC
Re: EMC
Les Watts
2002-08-23 15:28:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC
Gene
2002-11-18 21:30:53 UTC
EMC
Jon Elson
2002-11-19 21:04:40 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Gene
2002-11-19 21:16:30 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Tim Goldstein
2002-11-19 21:57:45 UTC
RE: [CAD_CAM_EDM_DRO] EMC
Matt Shaver
2002-11-19 22:14:29 UTC
Re: [CAD_CAM_EDM_DRO] EMC
William Scalione
2002-11-19 23:00:43 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Tim Goldstein
2002-11-19 23:30:51 UTC
RE: [CAD_CAM_EDM_DRO] EMC
Jon Elson
2002-11-20 10:29:21 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Yesamazza@a...
2003-02-08 09:09:21 UTC
EMC
William Scalione
2003-02-08 09:34:15 UTC
Re: [CAD_CAM_EDM_DRO] EMC
Vince Negrete
2003-09-15 03:25:04 UTC
EMC
Gene
2004-08-06 16:17:38 UTC
EMC