Re: [CAD_CAM_EDM_DRO] EMC

> I want to thank all who responded.
>
> I checked and the ini file is set up for steppermod.o and Period is
> commented out. If I start emc.run manually from a console window I can see
> that steppermod.o is being started and not freqmod.
>
> It must be the computer hardware itself. I expected a 233 to run at a
> tolerable level. I will have to look for an inexpensive Athlon or Duron
> board to replace it.
>
> Thank you again for the help.
>
> Scott
>

Scott

A 233 will run steppermod just fine. You may wish to post your INI file
in a message and let the pros take a gander at it. Probably just a setting
that needs to be changed. Only problem with steppermod is the ragged
pulses it puts out, but it will run. Steppermod is not a problem with the
Gecko G210's or the Gecko step/servo drives as they generate their
own pulses.

Bill