CAD CAM EDM DRO - Yahoo Group Archive

Re: Transformer question

Posted by Roman Black
on 2001-01-13 09:06:54 UTC
--- In CAD_CAM_EDM_DRO@egroups.com, Dick Ganderton <dick@g...> wrote:
> In simple terms, yes. You can even go the other way! The limit to
that is
> the breakdown voltage of the insulation.


Sorry to argue, but you can't. A 110v primary
transformer will blow very badly if connected to 240v.
Mains transformers are matched to the voltage and
frequency of the mains AC supply.

The primary needs to have the correct inductance.
Even going from a 50Hz to 60Hz country can have
significant effects, not so much with small
appliance transformers but larger ones will run
out of spec at the wrong mains frequency.
-Roman

>
> >Do transformers work on a ratio of input to output, or are they
strictly
> >for the rated voltages? In other words if I have a 240 to 120 step
down
> >and I put 120 on the primaries will I get 60 V on the secondaries?
> >What are the practical limits to doing what I described?
> >Thanks

Discussion Thread

Joe Vicars 2001-01-12 05:31:42 UTC Transformer question Jon Elson 2001-01-12 11:45:08 UTC Re: [CAD_CAM_EDM_DRO] Transformer question Dick Ganderton 2001-01-12 15:58:28 UTC Re: [CAD_CAM_EDM_DRO] Transformer question JanRwl@A... 2001-01-12 20:01:01 UTC Re: [CAD_CAM_EDM_DRO] Transformer question Ray 2001-01-12 20:12:38 UTC Re: Transformer question Jon Elson 2001-01-12 22:57:41 UTC Re: [CAD_CAM_EDM_DRO] Transformer question Jon Elson 2001-01-12 23:15:57 UTC Re: [CAD_CAM_EDM_DRO] Transformer question Roman Black 2001-01-13 09:06:54 UTC Re: Transformer question Hugh Prescott 2001-01-13 10:44:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Transformer question Tom Caudle 2001-01-13 18:52:34 UTC Re: Transformer question Tom 2001-10-29 15:18:18 UTC Transformer question JanRwl@A... 2001-10-29 19:31:43 UTC Re: [CAD_CAM_EDM_DRO] Transformer question Jon Elson 2001-10-29 21:31:59 UTC Re: [CAD_CAM_EDM_DRO] Transformer question Carol & Jerry Jankura 2001-10-30 05:55:58 UTC RE: [CAD_CAM_EDM_DRO] Transformer question Ray 2001-10-30 06:53:34 UTC Re: Transformer question tcsibor@v... 2001-10-30 11:27:32 UTC Re: Transformer question Andre' Blanchard 2001-10-30 14:26:15 UTC Re: Transformer question JanRwl@A... 2001-10-30 18:11:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Transformer question Ray 2001-10-31 12:47:16 UTC Re: Re: Re: Transformer question JJ 2002-10-01 16:12:47 UTC Transformer question mariss92705 2002-10-01 16:27:54 UTC Re: Transformer question JJ 2002-10-01 16:29:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Transformer question Raymond Heckert 2002-10-01 17:14:39 UTC Re: [CAD_CAM_EDM_DRO] Transformer question Carol & Jerry Jankura 2002-10-01 18:18:50 UTC RE: [CAD_CAM_EDM_DRO] Transformer question JJ 2002-10-02 16:15:18 UTC RE: [CAD_CAM_EDM_DRO] Transformer question eissej143 2002-10-26 22:49:20 UTC Re: Transformer question Tom Murray 2002-11-19 09:04:16 UTC Transformer question aussiedude 2002-11-19 09:36:53 UTC RE: [CAD_CAM_EDM_DRO] Transformer question turbulatordude 2002-11-19 19:14:42 UTC Re: Transformer question JanRwl@A... 2002-11-19 19:23:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Transformer question JanRwl@A... 2002-11-19 20:02:00 UTC Re: [CAD_CAM_EDM_DRO] Transformer question Raymond Heckert 2002-11-20 16:26:58 UTC Re: [CAD_CAM_EDM_DRO] Transformer question