Re: Souces of Timing/Drive Pulleys

--- In CAD_CAM_EDM_DRO@y..., ptengin@a... wrote:
<snip>There is a series of bushings that have no flange.
> These have setscrews doing locking and releasing. The trick is,
they have the
> holes right on the parting line between the pulley and the bushing.
So, if
> the part requires a "threaded" hole, it must be drilled and tapped
before the
> taper is cut as the taper boring procedure will cut away roughly
half of the
> hole.
>
> Hard to describe, next time I find one in my junk pile, I will
take a pic
> and post.
>
> Peter
> THRD, Inc.