CAD CAM EDM DRO - Yahoo Group Archive

Re: Black box again

Posted by ballendo@y...
on 2001-06-28 07:53:00 UTC
Tom,

Thank you.

Ballendo


--- In CAD_CAM_EDM_DRO@y..., "Tom Eldredge" <harmonyt@r...> wrote:
> Ballendo,
>
> I think I pay about 65.00 for it from the local computer store.
There are
> probably ways to get it cheaper, and if anyone knows, I'd
appreciate hearing
> from them.
>
> Tom E
> ----- Original Message -----
> From: <ballendo@y...>
> To: <CAD_CAM_EDM_DRO@y...>
> Sent: Wednesday, June 27, 2001 5:59 PM
> Subject: [CAD_CAM_EDM_DRO] Re: Black box again
>
>
> > Tom,
> >
> > What does the SIIG p-port card cost?
> >
> > The serial port may be going the direction of the p-port since,
yes,
> > USB is a "fancy" serial port(s).
> >
> >

Discussion Thread

Tom Eldredge 2001-06-25 09:45:32 UTC Black box again William Scalione 2001-06-25 11:05:56 UTC Re: [CAD_CAM_EDM_DRO] Black box again Dennis Cranston 2001-06-25 11:07:06 UTC RE: [CAD_CAM_EDM_DRO] Black box again Jon Elson 2001-06-25 11:21:18 UTC Re: [CAD_CAM_EDM_DRO] Black box again Tim Goldstein 2001-06-25 11:37:10 UTC RE: [CAD_CAM_EDM_DRO] Black box again Peter Renolds 2001-06-25 11:55:01 UTC Re: [CAD_CAM_EDM_DRO] Black box again Tom Eldredge 2001-06-25 12:12:32 UTC Re: [CAD_CAM_EDM_DRO] Black box again Tim Goldstein 2001-06-25 12:22:19 UTC RE: [CAD_CAM_EDM_DRO] Black box again Chris Stratton 2001-06-25 12:28:10 UTC Re: [CAD_CAM_EDM_DRO] Black box again Alan Marconett KM6VV 2001-06-25 13:30:31 UTC Re: [CAD_CAM_EDM_DRO] Black box again joelulaw@y... 2001-06-25 13:48:13 UTC Re: Black box again Jon Elson 2001-06-25 17:14:50 UTC Re: [CAD_CAM_EDM_DRO] Black box again Jon Elson 2001-06-25 17:19:42 UTC Re: [CAD_CAM_EDM_DRO] Black box again Jon Elson 2001-06-25 17:22:04 UTC Re: [CAD_CAM_EDM_DRO] Black box again Jon Elson 2001-06-25 20:03:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again machines@n... 2001-06-25 22:51:50 UTC Re: Black box again machines@n... 2001-06-25 22:56:31 UTC Re: Black box again Tom Eldredge 2001-06-26 04:19:47 UTC Re: [CAD_CAM_EDM_DRO] Black box again ballendo@y... 2001-06-26 06:07:01 UTC Re: Black box again Tom Eldredge 2001-06-26 06:34:16 UTC Re: [CAD_CAM_EDM_DRO] Black box again joelulaw@y... 2001-06-26 07:21:34 UTC Re: Black box again Tom Eldredge 2001-06-26 07:38:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 10:59:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 11:04:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 11:14:35 UTC Re: [CAD_CAM_EDM_DRO] Black box again Alan Marconett KM6VV 2001-06-26 11:33:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Tom Eldredge 2001-06-26 12:34:13 UTC Re: [CAD_CAM_EDM_DRO] Black box again Ian Wright 2001-06-26 12:38:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Carol & Jerry Jankura 2001-06-26 14:51:15 UTC RE: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 19:40:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 19:44:38 UTC Re: [CAD_CAM_EDM_DRO] Black box again Alan Marconett KM6VV 2001-06-26 21:57:42 UTC Re: Black box again dkowalcz@i... 2001-06-26 23:15:13 UTC Re: Black box again Jon Elson 2001-06-26 23:49:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Alan Marconett KM6VV 2001-06-27 11:06:46 UTC Re: Black box again Tom Eldredge 2001-06-27 11:31:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again JanRwl@A... 2001-06-27 11:35:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Tom Eldredge 2001-06-27 11:38:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Alan Marconett KM6VV 2001-06-27 12:54:34 UTC Re: Black box again Alan Marconett KM6VV 2001-06-27 13:05:07 UTC Re: Black box again ballendo@y... 2001-06-27 16:00:20 UTC Re: Black box again ballendo@y... 2001-06-27 16:52:28 UTC fire and forget was Re: Black box again Alan Marconett KM6VV 2001-06-27 18:12:32 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again ballendo@y... 2001-06-27 18:45:13 UTC re:fire and forget was Re: Black box again Alan Marconett KM6VV 2001-06-27 19:30:30 UTC re:fire and forget was Re: Black box again Jon Elson 2001-06-27 20:27:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Eric Keller 2001-06-27 20:28:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-27 20:31:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-27 20:53:49 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Alan Marconett KM6VV 2001-06-27 23:49:53 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Tom Eldredge 2001-06-28 04:05:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again dkowalcz@i... 2001-06-28 06:41:01 UTC Re: Black box again ballendo@y... 2001-06-28 07:53:00 UTC Re: Black box again ballendo@y... 2001-06-28 07:59:53 UTC Re: Black box again Jon Elson 2001-06-28 10:54:26 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Alan Marconett KM6VV 2001-06-28 11:39:16 UTC Re: Black box again Art Fenerty 2001-06-28 11:41:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Alan Marconett KM6VV 2001-06-28 12:31:35 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Paul 2001-06-28 15:29:11 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Jon Elson 2001-06-28 20:12:48 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Jon Elson 2001-06-28 20:19:49 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Tom Eldredge 2001-06-29 04:14:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again