Re: [CAD_CAM_EDM_DRO] Black box again

----- Original Message -----
From: Jon Elson <elson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, June 25, 2001 7:25 PM
Subject: Re: [CAD_CAM_EDM_DRO] Black box again


> Tom Eldredge wrote:
>
> > Jon,
> >
> > You ask a good question. The real reason is that I haven't learned to
> > program in C++ and that is what the EMC is written in.
> > The EMC sites are very intimidating to me.
> >
> > I suppose I should quit fiddling around and get an EMC machine running
and
> > dive in and learn how to use all of its power. I understand most of
what I
> > would want to customize is in the program that actually interfaces to
the
> > EMC program itself, so I might not need to learn C++.
>
> Right! You might want to do a little special stuff in some of the
> I/O (which is plain C) and in the GUI scripts, which are very easy to
> understand and modify.
>
> > So, I will take the hint, and back off. I don't mind your wake up call,
> > Jon. How are you coming on your combined 4 axis board? I am still
> > interested.
>
> See the other post, the big thing is some changes to EMC to get all I/O
> going through one port. The hardware (board layout) shouldn't be a big
> thing.
>
> Jon
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>