CAD CAM EDM DRO - Yahoo Group Archive

Re: Black box again

Posted by ballendo@y...
on 2001-06-27 16:00:20 UTC
Tom,

Thank you for the kind words...

What does the SIIG p-port card cost?

The serial port may be going the direction of the p-port since, yes,
USB is a "fancy" serial port(s).

Regarding the PCI bus, I can only say I "thought" the p-port would be
with us for some time to come... I find it truly amazing the way the
PC mfrs'(including s/w mfrs!) have continued to find ways
to "improve" the system in ways which require the replacement
of "old" systems. Thankfully the "peripheral" vendors have ALSO found
ways to let us continue using these "old" systems :-)

Hope this helps.

Ballendo

P.S. I LOVE the p-port! (miss the 5v centronics spec'd pin tho...)

--- In CAD_CAM_EDM_DRO@y..., "Tom Eldredge" <harmonyt@r...> wrote:
> Hi Jon, Ballendo, Alan , others,
>
>I appreciate your valuable input on this forum. We are all trying
>to be prudent about the future of the consumer based motherboards.
>I am afraid if we don't stick to the consumer products, we will be
>paying the big bucks for our processing power and motherboards.
>
> I use the dual parallel port SIIG PCI card. Under DOS,<snip>

Discussion Thread

Tom Eldredge 2001-06-25 09:45:32 UTC Black box again William Scalione 2001-06-25 11:05:56 UTC Re: [CAD_CAM_EDM_DRO] Black box again Dennis Cranston 2001-06-25 11:07:06 UTC RE: [CAD_CAM_EDM_DRO] Black box again Jon Elson 2001-06-25 11:21:18 UTC Re: [CAD_CAM_EDM_DRO] Black box again Tim Goldstein 2001-06-25 11:37:10 UTC RE: [CAD_CAM_EDM_DRO] Black box again Peter Renolds 2001-06-25 11:55:01 UTC Re: [CAD_CAM_EDM_DRO] Black box again Tom Eldredge 2001-06-25 12:12:32 UTC Re: [CAD_CAM_EDM_DRO] Black box again Tim Goldstein 2001-06-25 12:22:19 UTC RE: [CAD_CAM_EDM_DRO] Black box again Chris Stratton 2001-06-25 12:28:10 UTC Re: [CAD_CAM_EDM_DRO] Black box again Alan Marconett KM6VV 2001-06-25 13:30:31 UTC Re: [CAD_CAM_EDM_DRO] Black box again joelulaw@y... 2001-06-25 13:48:13 UTC Re: Black box again Jon Elson 2001-06-25 17:14:50 UTC Re: [CAD_CAM_EDM_DRO] Black box again Jon Elson 2001-06-25 17:19:42 UTC Re: [CAD_CAM_EDM_DRO] Black box again Jon Elson 2001-06-25 17:22:04 UTC Re: [CAD_CAM_EDM_DRO] Black box again Jon Elson 2001-06-25 20:03:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again machines@n... 2001-06-25 22:51:50 UTC Re: Black box again machines@n... 2001-06-25 22:56:31 UTC Re: Black box again Tom Eldredge 2001-06-26 04:19:47 UTC Re: [CAD_CAM_EDM_DRO] Black box again ballendo@y... 2001-06-26 06:07:01 UTC Re: Black box again Tom Eldredge 2001-06-26 06:34:16 UTC Re: [CAD_CAM_EDM_DRO] Black box again joelulaw@y... 2001-06-26 07:21:34 UTC Re: Black box again Tom Eldredge 2001-06-26 07:38:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 10:59:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 11:04:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 11:14:35 UTC Re: [CAD_CAM_EDM_DRO] Black box again Alan Marconett KM6VV 2001-06-26 11:33:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Tom Eldredge 2001-06-26 12:34:13 UTC Re: [CAD_CAM_EDM_DRO] Black box again Ian Wright 2001-06-26 12:38:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Carol & Jerry Jankura 2001-06-26 14:51:15 UTC RE: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 19:40:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-26 19:44:38 UTC Re: [CAD_CAM_EDM_DRO] Black box again Alan Marconett KM6VV 2001-06-26 21:57:42 UTC Re: Black box again dkowalcz@i... 2001-06-26 23:15:13 UTC Re: Black box again Jon Elson 2001-06-26 23:49:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Alan Marconett KM6VV 2001-06-27 11:06:46 UTC Re: Black box again Tom Eldredge 2001-06-27 11:31:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again JanRwl@A... 2001-06-27 11:35:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Tom Eldredge 2001-06-27 11:38:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Alan Marconett KM6VV 2001-06-27 12:54:34 UTC Re: Black box again Alan Marconett KM6VV 2001-06-27 13:05:07 UTC Re: Black box again ballendo@y... 2001-06-27 16:00:20 UTC Re: Black box again ballendo@y... 2001-06-27 16:52:28 UTC fire and forget was Re: Black box again Alan Marconett KM6VV 2001-06-27 18:12:32 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again ballendo@y... 2001-06-27 18:45:13 UTC re:fire and forget was Re: Black box again Alan Marconett KM6VV 2001-06-27 19:30:30 UTC re:fire and forget was Re: Black box again Jon Elson 2001-06-27 20:27:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Eric Keller 2001-06-27 20:28:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-27 20:31:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Jon Elson 2001-06-27 20:53:49 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Alan Marconett KM6VV 2001-06-27 23:49:53 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Tom Eldredge 2001-06-28 04:05:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again dkowalcz@i... 2001-06-28 06:41:01 UTC Re: Black box again ballendo@y... 2001-06-28 07:53:00 UTC Re: Black box again ballendo@y... 2001-06-28 07:59:53 UTC Re: Black box again Jon Elson 2001-06-28 10:54:26 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Alan Marconett KM6VV 2001-06-28 11:39:16 UTC Re: Black box again Art Fenerty 2001-06-28 11:41:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again Alan Marconett KM6VV 2001-06-28 12:31:35 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Paul 2001-06-28 15:29:11 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Jon Elson 2001-06-28 20:12:48 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Jon Elson 2001-06-28 20:19:49 UTC Re: [CAD_CAM_EDM_DRO] fire and forget was Re: Black box again Tom Eldredge 2001-06-29 04:14:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Black box again