RE: [CAD_CAM_EDM_DRO] Taig

I was wondering if anybody on this group that has a Taig mill is located in
Orlando Florida or anywhere close to the area.

I'm seriously considering getting a Taig but I want to see the machine first
and get a feel for what it can do and how happy people are with it.

Thanks,
Alex

-----Original Message-----
From: currinh@... [mailto:currinh@...]
Sent: Monday, December 10, 2001 1:02 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Vector with EMC


Alan, et al:

I am using EMC and starting to learn some Vector. So far I like Vector
and the connection (G-code) to EMC is painless. As I said, I'm just
learning Vector so my comments are as a novice. If anyone can correct or
add to my learning please let me know.

I have been using the EMC post-processor in Vector. I've found I need to
make a few changes to the set up. These include outputing G02/G03 moves
using radius rather than I/J and output 6 decimal places for X/Y/Z.
Also, for radius compenstation you need to manually add the 'D'
parameter for tool number following a G41 command. I also remove the
line numbers in Vector prior to exporting the G-code file, EMC doesn't
need these and I find it easier to modify the code if needed.

I'm only doing 2D as I only have X & Y going so far. I generate the
profile in another CAD package (Q-CAD or Cadkey) and import as *.dxf to
Vector. These come through well. I very much like Vector's methods of
selecting contours and directions. Also, the Approach and Depart are
great.

I know I've only scratched the surface of Vector and have a long ways to
go. But so far all is well and it fits with EMC well.

I hope this is along the lines of your questions and is of some help.

Hugh Currin
Klamath Falls, OR

On 10 Dec, seanc62 wrote:
> If the EMC BDI is fairly do-able I might be
> tempted to go that way. I purchased Vector CAD/CAM, so I'm interested
> in hearing how things work with Vector (if there are any issues
> to/worth mentioning).



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/