CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC

Posted by Chris Clough
on 2001-12-13 09:57:30 UTC
Dave,
Windows first? Oops - should I stop and do that?
-Chris

-----Original Message-----
From: dlantz@... [mailto:dlantz@...]
Sent: Thursday, December 13, 2001 11:55 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC

you can install lilo to the master boot sector, and it will give you the
option of either dos (it thinks all fat partitions are DOS) or linux at
boot
time, or you can opt to not install to the master boot sector and later
make
a boot floppy (later in the install process)
i have done both... master boot sector is probably easier

did you install windows first? you need to

---Dave L.

-----Original Message-----
From: Chris Clough [mailto:cclough@...]
Sent: Thursday, December 13, 2001 9:50 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC


Ok - I'm in the BDI install... got the partitions setup - I'm now to the
LILO config - do I want to create a boot disk and not install LILO? What
should I do!? :0
-Chris

-----Original Message-----
From: dlantz@... [mailto:dlantz@...]
Sent: Thursday, December 13, 2001 11:42 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC

should be!

-----Original Message-----
From: Chris Clough [mailto:cclough@...]
Sent: Thursday, December 13, 2001 9:40 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC


Ok... here's what I've done so far - I deleted my FAT32 partition, and
I'm making a 2GB FAT32 partition in fdisk for Windows. That leaves 2GB
of sector space left on the drive for BDI to deal with; that a viable
way to do things?
-Chris

-----Original Message-----
From: dlantz@... [mailto:dlantz@...]
Sent: Thursday, December 13, 2001 11:32 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC

i would let the 'custom' part of the BDI do that, it's got a nice
graphical
setup
just remember to do the 'custom' install, or it will try to repartition
and
reformat everything... i think (never actually done anything BUT a
custom
install).
you can use toms root boot floppy to save everything on you disk if you
have
somewhere to keep it
boot with it and do a man tar
you can use tar and bz2
to consolidate everything on the drive and then zip it up
that is what i do to backup this system (but it's dual booting right
now, so
i do it from the linux side, then reboot and burn the bziped file to a
cd---they have all compressed to less then 600 megs so far


---Dave L.

-----Original Message-----
From: Chris Clough [mailto:cclough@...]
Sent: Thursday, December 13, 2001 9:28 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC


That's what I'm doing right now - just checking Windows for stuff I need
to save. Should I make a partition in fdisk for Linux part/swap or just
FAT32 and let Linux make it's own partition?
-Chris

-----Original Message-----
From: dlantz@... [mailto:dlantz@...]
Sent: Thursday, December 13, 2001 11:23 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC

boot with a win98 boot floppy with fdisk on it, then fdisk the drive,
manually making a partition just for windows

-----Original Message-----
From: ccs@... [mailto:ccs@...]
Sent: Thursday, December 13, 2001 9:17 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC



> Have Windows installed and working on a small partition first on a
> fat file system.

That's the part I could never figure out how to do - windows always
wants to grab the entire drive. In the past I once resorted to
installing win3.1 (which is more cooperative) onto the desired
partition, then uprgrading it to win95. So more recently I've just
used a seperate drive or a seperate computer...

Chris Stratton

-------------------------------------------------
Christopher C. Stratton
Engineer, Instrument Maker, and Horn Player
ccs@... 617 628 1062
http://web.mit.edu/~stratton/www/brassbuild.html

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Discussion Thread

carlcnc 2001-12-08 22:48:52 UTC desknc for windows. Alan Marconett KM6VV 2001-12-09 13:23:23 UTC Re: [CAD_CAM_EDM_DRO] desknc for windows. seanc62 2001-12-10 04:22:16 UTC Re: desknc for windows. currinh@O... 2001-12-10 09:59:44 UTC Re: Vector with EMC Alex Canale 2001-12-10 10:08:52 UTC RE: [CAD_CAM_EDM_DRO] Taig Alan Marconett KM6VV 2001-12-10 11:20:45 UTC Re: desknc for windows. Alan Marconett KM6VV 2001-12-10 11:53:28 UTC Re: Vector with EMC wanliker@a... 2001-12-10 13:29:41 UTC Re: [CAD_CAM_EDM_DRO] Re: desknc for windows. currinh@O... 2001-12-10 16:19:24 UTC Re: Vector with EMC imserv1 2001-12-10 16:46:21 UTC Re: Vector with EMC Alan Marconett KM6VV 2001-12-10 16:48:04 UTC Re: Vector with EMC Ray 2001-12-10 17:41:25 UTC Re: Re: Vector with EMC fast1994gto 2001-12-10 19:18:06 UTC Re: Taig seanc62 2001-12-10 23:08:03 UTC Re: desknc for windows. Chris Clough 2001-12-11 00:07:25 UTC My Plasma Table Alex Canale 2001-12-11 05:44:20 UTC RE: [CAD_CAM_EDM_DRO] Re: Taig Keith Rumley 2001-12-11 06:37:18 UTC Re: Vector with EMC Alan Marconett KM6VV 2001-12-11 10:35:52 UTC Re: [CAD_CAM_EDM_DRO] My Plasma Table Chris Clough 2001-12-11 12:17:14 UTC RE: [CAD_CAM_EDM_DRO] My Plasma Table Alan Marconett KM6VV 2001-12-11 13:58:14 UTC Re: [CAD_CAM_EDM_DRO] My Plasma Table Chris Clough 2001-12-11 14:15:36 UTC RE: [CAD_CAM_EDM_DRO] My Plasma Table Steve Smith 2001-12-11 18:46:26 UTC Re: [CAD_CAM_EDM_DRO] My Plasma Table currinh@O... 2001-12-11 19:25:55 UTC Re: Vector with EMC IMService 2001-12-12 06:11:12 UTC Re: Re: Vector with EMC stevenson_engineers 2001-12-12 07:15:25 UTC Re: Vector with EMC Chris Clough 2001-12-13 08:45:15 UTC Dual booting w/EMC dlantz@a... 2001-12-13 08:48:08 UTC RE: [CAD_CAM_EDM_DRO] Dual booting w/EMC Chris Clough 2001-12-13 08:49:59 UTC RE: [CAD_CAM_EDM_DRO] Dual booting w/EMC dlantz@a... 2001-12-13 08:51:12 UTC RE: [CAD_CAM_EDM_DRO] Dual booting w/EMC tgoldsteinsprint1 2001-12-13 08:53:07 UTC Re: Dual booting w/EMC Chris Clough 2001-12-13 08:54:53 UTC RE: [CAD_CAM_EDM_DRO] Dual booting w/EMC dlantz@a... 2001-12-13 08:55:23 UTC RE: [CAD_CAM_EDM_DRO] Dual booting w/EMC dlantz@a... 2001-12-13 08:55:52 UTC RE: [CAD_CAM_EDM_DRO] Dual booting w/EMC Chris Clough 2001-12-13 09:11:54 UTC RE: [CAD_CAM_EDM_DRO] Dual booting w/EMC currinh@O... 2001-12-13 09:16:17 UTC Re: Dual booting w/EMC ccs@m... 2001-12-13 09:17:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC dlantz@a... 2001-12-13 09:23:32 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC Chris Clough 2001-12-13 09:28:21 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC dlantz@a... 2001-12-13 09:32:26 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC Chris Clough 2001-12-13 09:40:55 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC dlantz@a... 2001-12-13 09:42:05 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC Chris Clough 2001-12-13 09:50:41 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC dlantz@a... 2001-12-13 09:55:20 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC Chris Clough 2001-12-13 09:57:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC dlantz@a... 2001-12-13 10:01:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC Chris Clough 2001-12-13 10:04:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC dlantz@a... 2001-12-13 10:09:35 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC Chris Clough 2001-12-13 10:33:40 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC dlantz@a... 2001-12-13 10:35:33 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC Chris Clough 2001-12-13 10:38:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC Chris Clough 2001-12-13 10:44:37 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC resosys 2001-12-13 11:11:42 UTC Re: Dual booting w/EMC Chris Clough 2001-12-13 11:29:32 UTC EMC installed... I've lost my paddle tgoldsteinsprint1 2001-12-13 11:31:36 UTC Re: EMC installed... I've lost my paddle dlantz@a... 2001-12-13 11:33:57 UTC RE: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC Chris Clough 2001-12-13 11:37:02 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle dlantz@a... 2001-12-13 11:38:14 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle Chris Clough 2001-12-13 11:40:43 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle dlantz@a... 2001-12-13 11:45:06 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle Chris Clough 2001-12-13 11:47:28 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle Chris Clough 2001-12-13 11:50:11 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle Paul 2001-12-13 12:01:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Dual booting w/EMC imserv1 2001-12-13 12:06:42 UTC Re: EMC installed... I've lost my paddle dlantz@a... 2001-12-13 12:08:08 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle William Scalione 2001-12-13 12:11:20 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle Chris Clough 2001-12-13 12:23:18 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle dlantz@a... 2001-12-13 12:24:28 UTC RE: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle Alan Marconett KM6VV 2001-12-13 13:43:56 UTC Re: [CAD_CAM_EDM_DRO] Dual booting w/EMC Alan Marconett KM6VV 2001-12-13 13:46:59 UTC Re: [CAD_CAM_EDM_DRO] Dual booting w/EMC Alan Marconett KM6VV 2001-12-13 13:48:27 UTC Re: [CAD_CAM_EDM_DRO] Dual booting w/EMC Paul 2001-12-13 13:56:24 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC installed... I've lost my paddle Paul 2001-12-13 14:04:23 UTC Re: [CAD_CAM_EDM_DRO] Dual booting w/EMC Alan Marconett KM6VV 2001-12-13 14:18:38 UTC Re: [CAD_CAM_EDM_DRO] Dual booting w/EMC William Scalione 2001-12-13 16:18:22 UTC Re: [CAD_CAM_EDM_DRO] Dual booting w/EMC Alan Marconett KM6VV 2001-12-13 16:50:14 UTC Re: [CAD_CAM_EDM_DRO] Dual booting w/EMC fast1994gto 2001-12-13 17:29:42 UTC Re: Dual booting w/EMC Scott A. Stephens 2001-12-13 18:10:57 UTC Re: [CAD_CAM_EDM_DRO] Dual booting w/EMC Ian Wright 2001-12-14 14:23:08 UTC Re: [CAD_CAM_EDM_DRO] Dual booting w/EMC ian092680 2002-01-26 10:07:57 UTC Re: My Plasma Table