Re: servo vs stepper

Hi allen,

Yes they are the same ones c23L55W30 430 Peak oz/in, 36VDC, I have
USDigital E2-250 encoders on them. I am running the servos at 2:1
ratio with .631 Ball Dia X .200 Pitch Ball Screws.


Jeff Davis
http://www.homecnc.info

--- In CAD_CAM_EDM_DRO@y..., Alan Marconett KM6VV <KM6VV@a...> wrote:
> Hi Jeff,
>
> Which motors are they? Litton has a web site with motors, are they
> here? I'm interested in the other spec's for the motors (continuous
> torque), and what gear ratio/ballscrew you choose.
>
> http://www.litton-ps.com/Motors/c23series.html
>
> Alan KM6VV
>
>
> jeffdavis516 wrote:
> >
> > Dan at Camtronics has some servo motors and I am now stocking some
> > smaller ones that work with my Drill-Mill plans. I had to order a
> > good size quantity from the factory to get the price down, but
they
> > are still brand NEW from Poly-Sci. I am not marking up the
motors at
> > all if you get my plans, and only a slight amount if you don't.
Also
> > both Dan and myself sell the servos with encoders on them.
> >
> > Jeff Davis
> > http://www.homecnc.info