CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] servo vs stepper

Posted by Bob Muse
on 2004-09-02 09:48:52 UTC
Hi Keith

I have not been following this thread that closely but having done a fair
number of retros including series I and series II BP's I would encourage
you to hang in there a little longer before giving up or scrapping what you
have and going with servos. I spent a lot of time (being as how I had time
but no $$) playing with steppers before I got a good handle on them.

I think the geckos should work very well. Just a couple of other
thoughts/questions that may have already been mentioned but here goes-are
you using ball screws? How much friction in your ways, are you getting good
lube flow? I see you mention that your motors are high-inductance,
generally that's not that desirable it probably would be better to rewire.
How is the motor coupled to the leadscrew? My series I used lovejoy
couplings with rubber inserts and I think it helped quite a bit. Had to
change the rubber twice a year or so.

The learning curve can be frustrating but having the CNC is worth the
effort.

Bob
----- Original Message -----
From: "Keith Clark" <mail@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, September 02, 2004 6:47 AM
Subject: [CAD_CAM_EDM_DRO] servo vs stepper


> As many have read, I have been having a bad time making stepper
> motors work using Gecko drives. Several have recommended switching
> to servos but I have been fearful of tuning the motors etc. Is it
> really that difficult and that much more expensive? At this point I
> have spent $550 on each motor. I am also concerned about the
> difficulty of selecting the correct servo motors since I have had so
> much trouble with the stepper motors. I guess I would appreciate
> some encouragement or discouragement at this point especially from
> those of you that have done it with a Bridgeport. My machine is a
> Boss 6 Bridgeport.
>
> Thanks
> Keith Clark
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>

Discussion Thread

cdoughtynz 2002-04-02 23:42:43 UTC servo vs stepper Steve 2002-04-03 06:27:31 UTC Re: [CAD_CAM_EDM_DRO] servo vs stepper jeffdavis516 2002-04-03 09:02:42 UTC Re: servo vs stepper Jon Elson 2002-04-03 10:33:51 UTC Re: [CAD_CAM_EDM_DRO] servo vs stepper Peter Seddon 2002-04-03 10:51:15 UTC Re: [CAD_CAM_EDM_DRO] servo vs stepper Jon Elson 2002-04-03 11:03:13 UTC Re: [CAD_CAM_EDM_DRO] servo vs stepper gyachts 2002-04-03 23:00:01 UTC Re: servo vs stepper Jon Elson 2002-04-04 09:24:06 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper jeffdavis516 2002-04-04 10:39:35 UTC Re: servo vs stepper Alan Marconett KM6VV 2002-04-04 11:02:07 UTC Re: servo vs stepper jeffdavis516 2002-04-04 11:56:14 UTC Re: servo vs stepper Alan Marconett KM6VV 2002-04-04 12:49:08 UTC Re: servo vs stepper jeffdavis516 2002-04-04 13:15:03 UTC Re: servo vs stepper Tim Goldstein 2002-04-04 14:44:59 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper jeffdavis516 2002-04-04 15:17:33 UTC Re: servo vs stepper Alan Marconett KM6VV 2002-04-04 16:16:23 UTC Re: servo vs stepper Jon Elson 2002-04-04 22:30:21 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Jon Elson 2002-04-04 22:38:30 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Jon Elson 2002-04-04 22:43:14 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper jeffdavis516 2002-04-04 22:44:26 UTC Re: servo vs stepper Alan Marconett KM6VV 2002-04-05 00:08:32 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Alan Marconett KM6VV 2002-04-05 00:16:10 UTC Re: servo vs stepper Jon Elson 2002-04-05 09:35:02 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Tim Goldstein 2002-04-06 21:06:47 UTC RE: [CAD_CAM_EDM_DRO] Re: servo vs stepper Keith Clark 2004-09-02 06:48:59 UTC servo vs stepper R Rogers 2004-09-02 07:29:46 UTC Re: [CAD_CAM_EDM_DRO] servo vs stepper Keith Clark 2004-09-02 07:47:42 UTC Re: servo vs stepper Bob Muse 2004-09-02 09:48:52 UTC Re: [CAD_CAM_EDM_DRO] servo vs stepper turbulatordude 2004-09-02 09:59:33 UTC Re: servo vs stepper Keith Clark 2004-09-02 10:29:30 UTC Re: servo vs stepper Keith Clark 2004-09-02 10:36:25 UTC Re: servo vs stepper R Rogers 2004-09-02 12:28:25 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Bob Muse 2004-09-02 12:37:01 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Keith Clark 2004-09-02 13:05:32 UTC Re: servo vs stepper Stephen Wille Padnos 2004-09-02 13:49:08 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Keith Clark 2004-09-02 14:29:15 UTC Re: servo vs stepper Bob Muse 2004-09-02 15:06:44 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Stephen Wille Padnos 2004-09-02 18:07:24 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Stephen Wille Padnos 2004-09-02 18:27:48 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Jon Elson 2004-09-02 19:49:59 UTC Re: [CAD_CAM_EDM_DRO] servo vs stepper Jon Elson 2004-09-02 23:04:31 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Jon Elson 2004-09-02 23:11:22 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Keith Clark 2004-09-03 03:41:46 UTC Re: servo vs stepper Keith Clark 2004-09-03 03:45:35 UTC Re: servo vs stepper Keith Clark 2004-09-03 03:55:51 UTC Re: servo vs stepper Keith Clark 2004-09-03 04:03:01 UTC Re: servo vs stepper Keith Clark 2004-09-03 04:04:07 UTC Re: servo vs stepper Stephen Wille Padnos 2004-09-03 07:24:54 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Stephen Wille Padnos 2004-09-03 07:30:30 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Stephen Wille Padnos 2004-09-03 07:41:19 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Stephen Wille Padnos 2004-09-03 09:01:21 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Jon Elson 2004-09-03 09:36:21 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper Jon Elson 2004-09-03 09:42:16 UTC Re: [CAD_CAM_EDM_DRO] Re: servo vs stepper