Re: [CAD_CAM_EDM_DRO] Sherline Auto Tool Changer
Posted by
Alan Marconett KM6VV
on 2003-01-21 10:36:06 UTC
Hi Peter,
Perhaps a slightly scaled down version of what EMCO uses on their
Compact 5" lathe? There were some pix posted at one of our list
member's site, If I could only remember who...
Basically, it was a three position (6?) tool holder that was rotated by
a DC motor (I'd put in a stepper). The holder was turned slightly past
the tool position, then driven back against a pawl. Three slots held
the tool bits.
HTH
Alan KM6VV
"Peter Cruickshank " wrote:
Perhaps a slightly scaled down version of what EMCO uses on their
Compact 5" lathe? There were some pix posted at one of our list
member's site, If I could only remember who...
Basically, it was a three position (6?) tool holder that was rotated by
a DC motor (I'd put in a stepper). The holder was turned slightly past
the tool position, then driven back against a pawl. Three slots held
the tool bits.
HTH
Alan KM6VV
"Peter Cruickshank " wrote:
>
> Has anyone done any research on the feasibility of creating an
> automatic tool changer for a Sheline Mill ??
>
> If so, I would be interested to hear any inputs that anyone has.
>
> Thanx
>
> PeterC
Discussion Thread
Peter Cruickshank <crankshaft_sg@y...
2003-01-20 21:47:34 UTC
Sherline Auto Tool Changer
Alan Marconett KM6VV
2003-01-21 10:36:06 UTC
Re: [CAD_CAM_EDM_DRO] Sherline Auto Tool Changer
ballendo <ballendo@y...
2003-01-23 02:44:39 UTC
Re: Sherline Auto Tool Changer
Alan Marconett KM6VV
2003-01-23 10:45:49 UTC
Re: Sherline Auto Tool Changer
marble here
2003-01-23 14:01:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
alex
2003-01-23 14:52:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
Peter Cruickshank <crankshaft_sg@y...
2003-01-23 15:19:02 UTC
Re: Sherline Auto Tool Changer
James Owens
2003-01-23 15:32:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
Peter Cruickshank <crankshaft_sg@y...
2003-01-23 15:40:35 UTC
Re: Sherline Auto Tool Changer
James Owens
2003-01-23 15:51:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
alex
2003-01-23 16:54:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
James Owens
2003-01-23 17:49:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
RichD
2003-01-23 19:27:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
Peter Cruickshank <crankshaft_sg@y...
2003-01-23 21:03:30 UTC
Re: Sherline Auto Tool Changer
ballendo <ballendo@y...
2003-01-24 06:20:46 UTC
Re: Sherline Auto Tool Changer
James Owens
2003-01-24 06:24:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
ballendo <ballendo@y...
2003-01-24 06:37:51 UTC
Re: Sherline Auto Tool Changer
alex
2003-01-24 07:39:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
alex
2003-01-24 08:10:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
Peter Cruickshank <crankshaft_sg@y...
2003-01-24 08:20:43 UTC
Re: Sherline Auto Tool Changer
Kevin P. Martin
2003-01-24 09:07:17 UTC
RE: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
James Owens
2003-01-24 09:27:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
Bernard R <bwjarandall@c...
2003-01-24 12:02:17 UTC
Re: Sherline Auto Tool Changer
RichD
2003-01-24 13:17:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
wanliker@a...
2003-01-24 17:08:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
Brian Pitt
2003-01-24 21:47:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer
ballendo <ballendo@y...
2003-01-27 06:20:55 UTC
Re: Sherline Auto Tool Changer (mill/drills too!)
torsten98001 <torsten@g...
2003-01-27 11:43:12 UTC
Re: Sherline Auto Tool Changer (mill/drills too!)
Paul Mendoza <mr68gts@c...
2003-01-27 13:23:37 UTC
Re: Sherline Auto Tool Changer (mill/drills too!)
galt1x
2003-01-28 00:29:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer (mill/drills too!)
Peter Cruickshank <crankshaft_sg@y...
2003-01-28 06:22:13 UTC
Re: Sherline Auto Tool Changer (mill/drills too!)
ccq@x...
2003-01-28 07:21:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Sherline Auto Tool Changer (mill/drills too!)
Peter Cruickshank <crankshaft_sg@y...
2003-01-31 04:22:04 UTC
Re: Sherline Auto Tool Changer (mill/drills too!)
ballendo <ballendo@y...
2003-01-31 05:49:01 UTC
Re: Sherline Auto Tool Changer (mill/drills too!)
ballendo <ballendo@y...
2003-01-31 06:10:59 UTC
Re: Sherline Auto Tool Changer (mill/drills too!)
Peter Cruickshank <crankshaft_sg@y...
2003-02-02 03:54:55 UTC
Re: Sherline Auto Tool Changer (mill/drills too!)
turbulatordude <davemucha@j...
2003-02-02 08:15:15 UTC
Re: Sherline Auto Tool Changer (mill/drills too!)