Re: [CAD_CAM_EDM_DRO] Re: Best source for Servo's ??

>
>
>One of my primary recomendations to newbies is to leave room for
>large stuff. It usualy does not cost more to leave room for a 1 inch
>screw when you start out with a 1/2 one.
>
>ditto motors. Although I have been doing steppers, I recomend that a
>NEMA34 space be provided if one is planning on a NEMA23.
>
>I am laying out the rails for the unit and will make a simple 18 x 36
>becasue I have the parts. Well, actually, It will be a router table
>when it is all said and done, but that will prove out the speeds and
>feeds for the plasma. The two are being designed together, but I am
>more interested in the plasma being done correctly.
>
>Dave
>
>
>
>
>
>
>
>>turbulatordude wrote:
>>
>>
>>
>>>3/4 continuous ?
>>>
>>>I have a couple old printer motors. Brushed, one is 35 volt 1.1
>>>
>>>
>amps
>
>
>>>both have encoders.
>>>
>>>Both cog nicely. (if cogging is something you are looking for )
>>>
>>>
>It
>
>
>>>will offer a base from which to start.
>>>
>>>I also have those Pitman motors (16 watt) from the hp plotters.
>>>
>>>At least I'll have a place to start. pitman to treadmill
>>>
>>>
>motors...
>
>
>>>it is a shame I don't have a real servo in the surplus.
>>>
>>>Dave
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>
>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
>Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>