Re: [CAD_CAM_EDM_DRO] Re: Breakout board or cards

Terry,

I did not give John a complete list. Here is what I told John.

John.

I have not done a detailed analysis of other boards.

Our boards have integrated all the functions that we think are needed to
support Mach2.

A couple of things to look for. Support for 3.3 volt mother boards and
laptops. Our board supports 3.3 volts mother boards as we have designed it
with a buffer amplifier on the input.

Support for Gecko drives. Our onboard 5 volt power supply powers the Gecko
optical isolators. We have also selected the proper chip to drive the Gecko
drives.

We support the mach2 charge pump feature. In addition along with the charge
pump we may be the only one to have an anti chatter feature. Other boards
will let the stepper motors chatter or move when Mach2 does not have
control.

Support for solid-state relays and support for proximity sensors.

We just added another chip to better support the MPG feature. We will be
coming out with a little box that will contain MPG feature so that you can
take it to your mill and dial in the Z axis to set the tool at the top of
the material.

There are other features. I do need to make up a brochure with all the
features and why they are there.

Thanks for your interest in our breakout boards.

Bob Campbell
Bob@...
www.campbelldesigns.com
Breakout board
THC board sets
CNC router plans
Stepper Motors
VisualMill Basic

----- Original Message -----
From: "Blue" <jo001k1132@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, February 13, 2005 6:55 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Breakout board or cards


>
> Hi Bob,
>
> Could you send me the same note?
>
> Regrds,
>
> Terry
>
>
>
>>
>> Scott,
>>
>> Thanks for your nice comments.
>>
>> The $170 was for both the breakout board and the relay board.
>>
>> I sent a long note to John listing some of our finer features.
>>
>> Bob Campbell
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>