CAD CAM EDM DRO - Yahoo Group Archive

Re: linear bearing based on ground flat stock

on 2006-05-22 17:57:06 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, wanliker@... wrote:
>
>
> In a message dated 5/22/2006 4:11:32 P.M. Mountain Daylight Time,
> ballendo@... writes:
>
> Down side is the need to end mount the bar. But at your light loads
> and relatively small travels this shouldn't be a deal-breaker.
>

At some point silver steel and poly slides are much easier to work
with. the cost of larger bars is offset by the instant application.

all the work for the parts will take much more time.

Dave

Discussion Thread

Graham Stabler 2006-05-21 13:11:26 UTC linear bearing based on ground flat stock Jack Hudler 2006-05-21 15:42:03 UTC RE: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock Graham Stabler 2006-05-21 17:40:00 UTC Re: linear bearing based on ground flat stock Aftiel 2006-05-21 18:56:59 UTC Re: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock Jack Hudler 2006-05-21 19:53:32 UTC RE: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock Jack Hudler 2006-05-21 20:23:45 UTC RE: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock JanRwl@A... 2006-05-21 23:20:43 UTC Re: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock ballendo 2006-05-22 02:10:28 UTC Re: linear bearing based on ground flat stock Les Newell 2006-05-22 02:28:57 UTC Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock ballendo 2006-05-22 02:38:27 UTC Re: linear bearing based on ground flat stock Graham Stabler 2006-05-22 03:24:39 UTC Re: linear bearing based on ground flat stock Graham Stabler 2006-05-22 03:27:07 UTC Re: linear bearing based on ground flat stock Graham Stabler 2006-05-22 03:37:54 UTC Re: linear bearing based on ground flat stock ballendo 2006-05-22 04:07:14 UTC Re: linear bearing based on ground flat stock ballendo 2006-05-22 04:12:34 UTC Re: linear bearing based on ground flat stock ballendo 2006-05-22 04:19:13 UTC Re: linear bearing based on ground flat stock tomp-tag 2006-05-22 06:27:51 UTC Re: linear bearing based on ground flat stock Jack Hudler 2006-05-22 11:03:57 UTC RE: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock wanliker@a... 2006-05-22 11:07:17 UTC Re: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock Graham Stabler 2006-05-22 12:12:12 UTC Re: linear bearing based on ground flat stock Graham Stabler 2006-05-22 12:19:12 UTC Re: linear bearing based on ground flat stock wanliker@a... 2006-05-22 12:30:13 UTC Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock wanliker@a... 2006-05-22 12:37:49 UTC Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock Graham Stabler 2006-05-22 12:59:33 UTC Re: linear bearing based on ground flat stock wanliker@a... 2006-05-22 13:20:59 UTC Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock ballendo 2006-05-22 14:49:37 UTC Re: linear bearing based on ground flat stock ballendo 2006-05-22 15:10:31 UTC Re: linear bearing based on ground flat stock wanliker@a... 2006-05-22 15:33:21 UTC linear bearing based on ground flat stock Jack Hudler 2006-05-22 15:39:38 UTC RE: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock turbulatordude 2006-05-22 17:57:06 UTC Re: linear bearing based on ground flat stock Graham Stabler 2006-05-22 18:07:59 UTC Re: linear bearing based on ground flat stock Graham Stabler 2006-05-22 18:09:55 UTC Re: linear bearing based on ground flat stock ballendo 2006-05-22 20:04:04 UTC Re: linear bearing based on ground flat stock ballendo 2006-05-22 20:06:24 UTC Re: linear bearing based on ground flat stock ballendo 2006-05-22 20:12:47 UTC Re: linear bearing based on ground flat stock turbulatordude 2006-05-22 20:52:13 UTC Re: linear bearing based on ground flat stock JanRwl@A... 2006-05-22 22:00:30 UTC Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock wanliker@a... 2006-05-22 22:17:59 UTC linear bearing based on ground flat stock ballendo 2006-05-22 22:35:03 UTC Re: linear bearing based on ground flat stock ballendo 2006-05-22 22:44:35 UTC Re: linear bearing based on ground flat stock wthomas@g... 2006-05-22 23:25:58 UTC W.E.T. [CAD_CAM_EDM_DRO] Rd bearing based on ground Drill Rod Graham Stabler 2006-05-23 03:23:00 UTC Re: linear bearing based on ground flat stock Fred Smith 2006-05-23 07:10:50 UTC Re: linear bearing based on ground flat stock turbulatordude 2006-05-23 09:08:10 UTC Re: linear bearing based on ground flat stock Fred Smith 2006-05-23 09:28:44 UTC Re: linear bearing based on ground flat stock turbulatordude 2006-05-23 10:37:42 UTC Re: linear bearing based on ground flat stock ballendo 2006-05-23 14:43:24 UTC Re: linear bearing based on ground flat stock Graham Stabler 2006-05-23 16:09:18 UTC Re: linear bearing based on ground flat stock Blue 2006-05-23 18:06:42 UTC Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock Graham Stabler 2006-05-24 02:50:27 UTC Re: linear bearing based on ground flat stock turbulatordude 2006-05-24 06:52:49 UTC Re: linear bearing based on ground flat stock Graham Stabler 2006-05-24 08:01:08 UTC Re: linear bearing based on ground flat stock wthomas@g... 2006-05-24 10:48:02 UTC W.E.T. [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock Graham Stabler 2006-05-24 15:52:20 UTC W.E.T. [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock