Re: linear bearing based on ground flat stock
Posted by
turbulatordude
on 2006-05-23 10:37:42 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Fred Smith" <imserv@...> wrote:
in NJ or NY ?
Things change rapidly either way.
Dave
>I thought the rep was in Ohio, but the parts were manufactured either
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
> <dave_mucha@> wrote:
> >
> > --- In CAD_CAM_EDM_DRO@yahoogroups.com, "ballendo" <ballendo@>
> wrote:
> > >
> > > Hello,
> > >
> > > Here's another source. I think Fred at Imserve is using this
> > > supplier:
> > >
> > > http://www.superiorbearing.com/
> > >
> >
> >
> > Superior bearing is made in an old BishopWisecarver manufacturing
> > facility. I think they downsized and stopped using them as one of
> the
> > suppliers.
> >
> > They are here on the east coast.
>
> Try Ohio. Things change very rapidly in US supply chains, you might
> be uninformed as to their current organization/suppliers.
>
> Fred Smith - IMService
>
in NJ or NY ?
Things change rapidly either way.
Dave
Discussion Thread
Graham Stabler
2006-05-21 13:11:26 UTC
linear bearing based on ground flat stock
Jack Hudler
2006-05-21 15:42:03 UTC
RE: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock
Graham Stabler
2006-05-21 17:40:00 UTC
Re: linear bearing based on ground flat stock
Aftiel
2006-05-21 18:56:59 UTC
Re: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock
Jack Hudler
2006-05-21 19:53:32 UTC
RE: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock
Jack Hudler
2006-05-21 20:23:45 UTC
RE: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock
JanRwl@A...
2006-05-21 23:20:43 UTC
Re: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock
ballendo
2006-05-22 02:10:28 UTC
Re: linear bearing based on ground flat stock
Les Newell
2006-05-22 02:28:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock
ballendo
2006-05-22 02:38:27 UTC
Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-22 03:24:39 UTC
Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-22 03:27:07 UTC
Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-22 03:37:54 UTC
Re: linear bearing based on ground flat stock
ballendo
2006-05-22 04:07:14 UTC
Re: linear bearing based on ground flat stock
ballendo
2006-05-22 04:12:34 UTC
Re: linear bearing based on ground flat stock
ballendo
2006-05-22 04:19:13 UTC
Re: linear bearing based on ground flat stock
tomp-tag
2006-05-22 06:27:51 UTC
Re: linear bearing based on ground flat stock
Jack Hudler
2006-05-22 11:03:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock
wanliker@a...
2006-05-22 11:07:17 UTC
Re: [CAD_CAM_EDM_DRO] linear bearing based on ground flat stock
Graham Stabler
2006-05-22 12:12:12 UTC
Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-22 12:19:12 UTC
Re: linear bearing based on ground flat stock
wanliker@a...
2006-05-22 12:30:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock
wanliker@a...
2006-05-22 12:37:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-22 12:59:33 UTC
Re: linear bearing based on ground flat stock
wanliker@a...
2006-05-22 13:20:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock
ballendo
2006-05-22 14:49:37 UTC
Re: linear bearing based on ground flat stock
ballendo
2006-05-22 15:10:31 UTC
Re: linear bearing based on ground flat stock
wanliker@a...
2006-05-22 15:33:21 UTC
linear bearing based on ground flat stock
Jack Hudler
2006-05-22 15:39:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock
turbulatordude
2006-05-22 17:57:06 UTC
Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-22 18:07:59 UTC
Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-22 18:09:55 UTC
Re: linear bearing based on ground flat stock
ballendo
2006-05-22 20:04:04 UTC
Re: linear bearing based on ground flat stock
ballendo
2006-05-22 20:06:24 UTC
Re: linear bearing based on ground flat stock
ballendo
2006-05-22 20:12:47 UTC
Re: linear bearing based on ground flat stock
turbulatordude
2006-05-22 20:52:13 UTC
Re: linear bearing based on ground flat stock
JanRwl@A...
2006-05-22 22:00:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock
wanliker@a...
2006-05-22 22:17:59 UTC
linear bearing based on ground flat stock
ballendo
2006-05-22 22:35:03 UTC
Re: linear bearing based on ground flat stock
ballendo
2006-05-22 22:44:35 UTC
Re: linear bearing based on ground flat stock
wthomas@g...
2006-05-22 23:25:58 UTC
W.E.T. [CAD_CAM_EDM_DRO] Rd bearing based on ground Drill Rod
Graham Stabler
2006-05-23 03:23:00 UTC
Re: linear bearing based on ground flat stock
Fred Smith
2006-05-23 07:10:50 UTC
Re: linear bearing based on ground flat stock
turbulatordude
2006-05-23 09:08:10 UTC
Re: linear bearing based on ground flat stock
Fred Smith
2006-05-23 09:28:44 UTC
Re: linear bearing based on ground flat stock
turbulatordude
2006-05-23 10:37:42 UTC
Re: linear bearing based on ground flat stock
ballendo
2006-05-23 14:43:24 UTC
Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-23 16:09:18 UTC
Re: linear bearing based on ground flat stock
Blue
2006-05-23 18:06:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-24 02:50:27 UTC
Re: linear bearing based on ground flat stock
turbulatordude
2006-05-24 06:52:49 UTC
Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-24 08:01:08 UTC
Re: linear bearing based on ground flat stock
wthomas@g...
2006-05-24 10:48:02 UTC
W.E.T. [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock
Graham Stabler
2006-05-24 15:52:20 UTC
W.E.T. [CAD_CAM_EDM_DRO] Re: linear bearing based on ground flat stock