Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Posted by
BRIAN FOLEY
on 2006-06-02 19:51:30 UTC
this is correct, and maybe even raise the voltage very slowly over a period
of 10 or 12 hours or more. i used to watch the current of leakage but you
need electronics test equipment. even if you take several days to get the
voltage up to the limit will not hurt anything. cul brian f.
of 10 or 12 hours or more. i used to watch the current of leakage but you
need electronics test equipment. even if you take several days to get the
voltage up to the limit will not hurt anything. cul brian f.
----- Original Message -----
From: "rrrevels" <n4ft@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, June 02, 2006 1:04 PM
Subject: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
> A friend of mine rebuilds old amateur radios (tube type) and he says
> he reforms the capacitors using a variac. He starts the voltage very
> low and slowly brings it to normal over several hours.
>
> Hope this helps.
>
> Russ
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "oldpayphones" <larry@...> wrote:
> >
> > I have some used 200VDC 5400UF capacitors from a 1970's Bridgeport that
> > have been sitting for a couple of years and I was wondering if there is
> > a correct procedure for charging them initally. I have had stereo PS
> > caps explode after sitting for some time.
> >
> > Thanks,
> > Larry Olson
> >
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.8.1/355 - Release Date: 6/2/06
>
>
Discussion Thread
oldpayphones
2006-06-02 08:38:21 UTC
Charging Capacitors
rrrevels
2006-06-02 10:07:28 UTC
Re: Charging Capacitors
wanliker@a...
2006-06-02 10:24:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Dave Halliday
2006-06-02 11:29:24 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Larry Olson
2006-06-02 12:09:16 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Larry Olson
2006-06-02 12:28:39 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Larry Olson
2006-06-02 12:38:00 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
rrrevels
2006-06-02 13:28:38 UTC
Re: Charging Capacitors
David Speck
2006-06-02 13:31:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Dave Halliday
2006-06-02 14:49:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
BRIAN FOLEY
2006-06-02 19:51:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
oldpayphones
2006-06-02 21:18:45 UTC
Re: Charging Capacitors
JanRwl@A...
2006-06-02 21:45:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Dave Halliday
2006-06-02 21:48:42 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
wanliker@a...
2006-06-02 22:43:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Dave Halliday
2006-06-03 00:23:19 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
ballendo
2006-06-03 05:22:12 UTC
Re: Charging Capacitors
ballendo
2006-06-03 05:25:49 UTC
Re: Charging Capacitors
Alan Rothenbush
2006-06-03 19:03:33 UTC
Re: [CAD_CAM_EDM_DRO] Charging Capacitors
oldpayphones
2006-06-07 10:02:04 UTC
Re: Charging Capacitors
David Speck
2006-06-07 13:31:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Larry Olson
2006-06-07 13:48:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
David Speck
2006-06-07 14:02:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
wanliker@a...
2006-06-07 14:41:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Larry Olson
2006-06-07 14:51:04 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Larry Olson
2006-06-07 14:51:09 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Larry Olson
2006-06-07 15:00:02 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
David Speck
2006-06-07 20:56:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
wanliker@a...
2006-06-07 21:19:08 UTC
Charging Capacitors
Larry Olson
2006-06-07 23:04:26 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
Mariss Freimanis
2006-06-07 23:10:36 UTC
Re: Charging Capacitors
Larry Olson
2006-06-07 23:44:51 UTC
RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
oldpayphones
2006-06-08 01:21:54 UTC
Re: Charging Capacitors
BRIAN FOLEY
2006-06-08 03:02:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
BRIAN FOLEY
2006-06-08 03:07:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors
R Rogers
2006-06-08 06:04:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors