RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors

OH I forgot to add that they all seem to do the same thing. One did
however hover around 1.00 for an extended period before dropping to the
.20 - .60 range.

And my resistor values in the previous email are 10 OHM and 20 OHM. The
new Yahoo font makes the 0's look like O's.



Larry O.



_____

From: Larry Olson
Sent: Wednesday, June 07, 2006 2:50 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Charging Capacitors



Tried to do the whole bank at first. Been doing them individually since
Saturday

Thanks,

Larry O.

_____

From: wanliker@... <mailto:wanliker%40aol.com>
[mailto:wanliker@... <mailto:wanliker%40aol.com> ]
Sent: Wednesday, June 07, 2006 2:38 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
<mailto:CAD_CAM_EDM_DRO%40yahoogroups.com>
Subject: Re: [CAD_CAM_EDM_DRO] Re: Charging Capacitors

In a message dated 6/7/2006 11:03:00 A.M. Mountain Daylight Time,
larry@... <mailto:larry%403-slot.com>
<mailto:larry%403-slot.com> writes:

This translates to about 170VDC. I can't
get the caps to fall below about 50MA of current draw at 170VDC.

If you are doing them all at once, I would suggest you do each
separately,
and see what each individual cap is doing?
bill

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]