Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto

At 07:27 20/06/2006, you wrote:

>BDI 4.49 is quite different than EMC2. The version of EMC on the BDI
>distro is EMC at the lower levels, with some parts of EMC2 at the
>higer levels. BDI development branched from EMC quite some time ago.
>The configuration method and flexibility is drastically different
>between the two. EMC2 is quite flexible in it's handling of hardware.
>You can get more info www.linuxcnc.org.

So, there is EMC, EMC2, and EMC/BDI, all of which are different, and all of
which are maintained by some loose collection of Unix/Linux geeks. If I
wasn't already running screaming in the opposite direction, I would be now!

Regards,
Tony