Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Posted by
Tony Jeffree
on 2006-06-20 08:53:24 UTC
At 16:44 20/06/2006, you wrote:
Windows (or Linux, or a small country in Africa) onto their machine before
then installing an application - the PC comes with that stuff already done.
So comparing how much trouble you had installing the OS is missing the point.
I installed DeskCNC on a naff old 200 meg laptop the other week - Windows
98 - loaded no trouble, ran perfectly, no need to load the OS at all. THAT
is what most users want to see - they don't give a rat's for how easy it is
to install the OS.
Regards,
Tony
>I actually had less trouble with BDI than I had with the last XPThe point is though that the average user doesn't expect to have to install
>install. I'm now trying to get W2k onto the 1.2GHz ITX board - I'll let
>people know in a few hours time if Mach3 will run on THAT hardware. I'm
>reconning on three hours to install since I have to sort out all the
>proper drivers - something that BOTH Linux installs had no need of :)
Windows (or Linux, or a small country in Africa) onto their machine before
then installing an application - the PC comes with that stuff already done.
So comparing how much trouble you had installing the OS is missing the point.
I installed DeskCNC on a naff old 200 meg laptop the other week - Windows
98 - loaded no trouble, ran perfectly, no need to load the OS at all. THAT
is what most users want to see - they don't give a rat's for how easy it is
to install the OS.
Regards,
Tony
Discussion Thread
Erick
2006-06-18 21:38:48 UTC
EMC and Taig w/ MicroProto
Lester Caine
2006-06-18 23:49:21 UTC
Re: [CAD_CAM_EDM_DRO] EMC and Taig w/ MicroProto
Erick
2006-06-19 07:43:44 UTC
Re: EMC and Taig w/ MicroProto
Peter Homann
2006-06-19 14:59:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Lester Caine
2006-06-19 16:07:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Erick
2006-06-19 21:56:31 UTC
Re: EMC and Taig w/ MicroProto
Erick
2006-06-19 21:57:48 UTC
Re: EMC and Taig w/ MicroProto
vavaroutsos
2006-06-19 23:33:14 UTC
Re: EMC and Taig w/ MicroProto
Tony Jeffree
2006-06-19 23:52:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Lester Caine
2006-06-19 23:58:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
David A. Frantz
2006-06-20 07:31:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Tony Jeffree
2006-06-20 07:44:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
John Stevenson
2006-06-20 08:24:10 UTC
Re: EMC and Taig w/ MicroProto
cncboat
2006-06-20 08:28:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC sw model WAS re: and Taig w/ MicroProto
Lester Caine
2006-06-20 08:48:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Tony Jeffree
2006-06-20 08:53:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
R Rogers
2006-06-20 09:03:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Mike Delany
2006-06-20 09:04:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Roy J. Tellason
2006-06-20 09:10:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Lester Caine
2006-06-20 09:13:42 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
vavaroutsos
2006-06-20 10:27:11 UTC
Re: EMC and Taig w/ MicroProto
Lester Caine
2006-06-20 11:30:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Lester Caine
2006-06-20 23:42:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
John Stevenson
2006-06-21 00:33:10 UTC
Re: EMC and Taig w/ MicroProto
John Stevenson
2006-06-21 00:45:20 UTC
Re: EMC and Taig w/ MicroProto
Lester Caine
2006-06-21 00:56:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
John Stevenson
2006-06-21 01:18:02 UTC
Re: EMC and Taig w/ MicroProto
Lester Caine
2006-06-21 01:46:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Stephen Wille Padnos
2006-06-21 06:14:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Stephen Wille Padnos
2006-06-21 06:28:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
art
2006-06-21 07:36:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Jon Elson
2006-06-21 09:52:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto
Alan Marconett
2006-06-21 11:09:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: EMC and Taig w/ MicroProto