Re: [CAD_CAM_EDM_DRO] Re: Power supply

>The simple & safe solution is to use a Varac to lower the input
>voltage of your transformer. Try www.allelectronics.com as a source.
>
>Regards
>Larry
>
>
>
>--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Mina Aboul Saad" <minaf@...>
>wrote:
> >
> > Hi,
> >
> > I'm trying to rebuild the power supply that came with an old lathe,
>the Transformer is good I took 65 AC from the output fed it to a
>bridge to get the DC and then on to a Capacitor.
> > The thing is the DC voltage after the bridge is stable at 65 VDC
>but after the Capacitor it grows up to 90 VDC which is too high for
>my Geckos 320.
> >
> > Any advise?
> >
> > Mina F.
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
>timg@...
>Moderator: pentam@... indigo_red@...
>davemucha@... [Moderators]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
>THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>bill
>List Mom
>List Owner
>
>
>Yahoo! Groups Links
>
>
>
>